Xerox Phaser 860 Manuale di impostazione della rete - Pagina 37

Sfoglia online o scarica il pdf Manuale di impostazione della rete per Stampante Xerox Phaser 860. Xerox Phaser 860 42. Color printer
Anche per Xerox Phaser 860: Manuale di installazione del modulo vassoio (2 pagine), Manuale di installazione (2 pagine), Manuale di installazione (1 pagine), Manuale di rilascio rapido (1 pagine), Manuale supplementare (1 pagine), Manuale supplementare (11 pagine), Opuscolo e specifiche (4 pagine), Mappa del menu (1 pagine), Manuale di configurazione e riferimento rapido (36 pagine), Manuale di installazione (1 pagine), Manuale di servizio (11 pagine)

Network Protocols

All protocols can be enabled and disabled. The Configuration Page displays which

protocols are enabled. If a protocol is enabled, the field for that protocol lists the current

parameters. If the protocol is disabled, the field for that protocol contains an entry reading

Off.

After your network configuration is complete, you may want to disable protocols that you

are not using to avoid unnecessary network traffic. There are four ways to disable

protocols:

Use the printer's front panel — see page 32.

Using CentreWare DP — In NetWare environments, you can use CentreWare DP. See

the CentreWare DP Setup and User Guide.

Using CentreWare IS — see page 32.

With a TCP/IP connection and a World Wide Web browser, you can use CentreWare

IS.

Using PostScript Utility Files

Send the appropriate PostScript utility file to the printer. See the ReadMe files on the

printer's CD-ROM. The PC ReadMe file is in the UTILS directory; the Macintosh

ReadMe file is in the Network Utilities folder.

You can enable protocols by the same procedure. Just select the command to enable a

protocol rather than disable it.

Networking Setup Guide

Network Protocols