Xerox Wide Format 6030 Manuale d'uso - Pagina 31

Sfoglia online o scarica il pdf Manuale d'uso per Stampante Xerox Wide Format 6030. Xerox Wide Format 6030 48. Wide format twain
Anche per Xerox Wide Format 6030: Manuale d'uso (22 pagine), Note di rilascio (7 pagine), Manuale di configurazione (20 pagine), Nota di rilascio (23 pagine), Nota di rilascio (8 pagine), Nota di rilascio (8 pagine), Nota di rilascio (9 pagine), Manuale di formazione per i clienti (50 pagine), Manuale d'uso (36 pagine)

Custom size

Document width and length can be specified by 1mm increment. By clicking right

mouse button on either of [Width] or [Length], standard size width and length can be

specified from the list provided.

• If you select [Custom size], [Scan start position] and [Offset] can be specified.

• Mirror image (refer to [3]Contrast Reversal/Mirror Image) cannot be selected when

[Standard size custom specification] has been selected.

Offset

If you select [Standard size custom specification] or [Custom size] in standard mode,

[Offset] button becomes active. Click [Offset] button to open [Offset] dialog, and enter

the offset value. Offset value ranges from 0 to 310mm.

Up/Down

• If offset value is set beyond the size of the document, it becomes blank data or error.

• The initial point of offset is the point specified by scan start position adjustment.

Scan start position

[Scan start position] dialog box will be displayed when you click [Scan start position]

button.

You can set the scan start position by specifying the distance from lead and left edge of

the document. Available value range from the initial point is from -500 to 500mm for

fast scan direction, and -999 to 999mm for slow scan direction.

Up/Down

-(minus)

Document

*Auto size recognition in Scan Start Position adjusted mode

Left/Right

Original

+(plus)

(From the front side of the document)

3.1 Available scanning function

Left/Right

-(minus)

Document