•
Custom Size Allowed - Allows the System Administrator to allow custom size paper to be used for print jobs. Is accessible by
typing http://{IP Address}/diagnostics/customSizeAllowed.php.
•
Display CAC/PIV Feature - Allows the System Administrator to enable the display of the CAC/PIV feature. Is accessible by
typing http://{IP Address}/diagnostics/enableCAC.php.
•
HTTP SSL Cipher Encryption Strength - Allows the System Administrator to control the set of supported ciphers when using
SSL (e.g., to enforce 128 bit or higher encryption keys). Is accessible by typing http://{IP
Address}/diagnostics/SSLCiphers.php.
•
Port 9100 Print Stream Filtering - Allows the System Administrator to enable/disable the filtering of the RAW IP print
stream for the occurrence of the PostScript control-T character. Is accessible by typing http://{IP
Address}/diagnostics/Port9100PrintStreamFiltering.php.
•
CRU Low/Reorder Message Suppression - Allows the System Administrator to set whether the CRU Low/Reorder messages
are enabled/disabled. Is accessible by typing http://{IP Address}/diagnostics/CRULowReorderMessageSuppression.php.
•
Cost Control Enablement and Receipt Printing Setup - Allows the System Administrator to enable the Cost Control feature
when Secure Access and network accounting is enabled. Is accessible by typing http://{IP
Address}/diagnostics/CostControl.php.
•
Install Software (View Scan Templates Created by WIA Driver) - Allows the System Administrator to install the
#00022121 Network Controller version to view templates created by the Microsoft Windows Image Acquisition (WIA)
driver. Is accessible by typing http://{IP Address}/diagnostics/00022121.dhtml. The System Administrator should be aware
that installing this Network Controller version will result in the device no longer being in the evaluated configuration.
18. The following pages are available from the Web User Interface with no user login and authentication required:
•
Site Map - Provides the user with hyperlink pointers to each Web User Interface screen organized by Web UI tab. Is
accessible by selecting the [Site Map] button in the upper right hand corner of every Web User Interface page.
•
Exit from Sleep Mode – Automatically informs the user, when the Network Controller on the device is in 'Sleep Mode' at
the time the user attempts to make a change to current settings on a Web User Interface web page, that the Network
Controller needs to be taken out of 'Sleep Mode' before the requested changes can be made.
19. Customers who required specialized changes to support unique workflows in their environment may request specific changes to
normal behavior. Xerox will supply these SPAR releases to the specific customers requesting the change. Please note that in
general enabling a specialized customer-specific feature will take the system out of certified configuration.
Contact
For additional information or clarification on any of the product information given here, contact Xerox support.
Disclaimer
The information provided in this Xerox Product Response is provided "as is" without warranty of any kind. Xerox Corporation
disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular
purpose. In no event shall Xerox Corporation be liable for any damages whatsoever resulting from user's use or disregard of
the information provided in this Xerox Product Response including direct, indirect, incidental, consequential, loss of business
profits or special damages, even if Xerox Corporation has been advised of the possibility of such damages. Some states do no
allow the exclusion or limitation of liability for consequential damages so the foregoing limitation may not apply.
10
Stampa la pagina