Xerox WorkCentre 7300 Series Manuale di risoluzione dei problemi - Pagina 9

Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi per Stampante Xerox WorkCentre 7300 Series. Xerox WorkCentre 7300 Series 40. Xerox printer guide 7300

Stampa la pagina
Xerox WorkCentre 7300 Series Manuale di risoluzione dei problemi
Overview
Color calibration procedures adjust the printer for optimal color output. Color settings may need adjustment upon initial
printer set-up or when toners and imaging units are replaced. There are two procedures:
Balance
Colors. If the overall image appears either too light or dark, use the
adjustment of the primary colors (cyan, magenta and yellow) is needed, continue with the
Lighten/Darken Colors
The Lighten/Darken Colors procedure uniformly increases or decreases each primary color (cyan, magenta and yellow
and black) to produce a lighter or darker image.
Procedure:
1.
Select
Lighten/Darken Colors
to evaluate the lightness/darkness of the image. The printer's current Lighten/Darken Value is listed on the page.
2.
Use the Up Arrow and Down Arrow keys to change the value from -5 (lightest) to 5 (darkest) and press OK.
3.
The
Color Reference Page
achieve the desired result.
4.
To finish the procedure select one of the following:
Accept Changes and
Accept Changes and
Discard Changes and

Balance Colors

The Balance Colors procedure sets the balance between the primary colors (cyan, magenta and yellow) to simulate black.
Each of the color balance pages (like the page illustrated on the right) contains a
large cluster of circles, numbered from 0 to 54, that vary in hue.
The center circle (0) should match or appear to blend with some portion of its
surrounding hexagonal gray ring. The circle can show a color shift if one or more
of the colors are printing with a different density. For example, if cyan is printing
lighter than normal, the circle will appear redder.
Procedure:
1.
Select
Balance Colors
2.
Follow the steps on the
3.
Follow the steps on the
Page 1 of 1
from the
Calibrate Colors Menu
automatically prints using the new lighten/darken value. Repeat this procedure until you
Continue: Saves the new value and returns to the
Exit: Saves the new value and returns to the
Exit: Returns to the
Main Menu
from the
Calibrate Colors
Light Color Balance
page until the desired adjustment is achieved.
Dark Color Balance
page until the desired adjustment is achieved.
®
PHASER
7300 COLOR PRINTER
and press OK. Use the printed
Main
without saving.
Menu. The
Light Color Balance

Color Calibration Tutorial

Lighten/Darken Colors
Lighten/Darken Colors
procedure. If a finer
Balance Colors
Color Reference Page
Calibrate Colors
Menu.
Menu.
42
25
43
26
44
27
45
28
46
page prints automatically.
and
procedure.
Phaser 7300 Color Printer
Light Color Balance Adjustment
40
39
41
22
38
23
21
37
24
10
20
11
9
19
12
2
8
54
3
1
36
13
0
7
53
4
6
35
14
5
18
52
15
17
34
29
16
33
30
32
51
47
31
50
48
49