Xerox 665 Nota di rilascio - Pagina 8
Sfoglia online o scarica il pdf Nota di rilascio per Stampante All in One Xerox 665. Xerox 665 14. Customer software release supplement
![Xerox 665 Nota di rilascio](/uploads/products/server2/7033238/7033238.png)
H
T
INTS AND
IPS
FreeFlow Scanner 665
Table 2-1. FreeFlow Scanner 665 Hints and Tips
#
Feature/Function
1
Hole Fill
2
"Hole Fill" when
"Reprocessing"
images in "Preview"
3
Scanning
photographs
4
Artifacts in
"Automatic" mode
2-2
Table 2-1 lists Hints and Tips for the FreeFlow Scanner 665.
Hints/Tips
Regular use of the "Hole Fill" function in the scanner requires daily cleaning
of the paper guide on the automatic document handler (ADH). The paper
guide is the long, dark gray, plastic strip on the underside of the ADH, has a
pattern of very thin images, and two cutouts for the rollers. The following
steps should be used to clean this part:
1. Apply "Xerox Lens and Mirror Cleaner (XPN 43P81)" to a clean, lint
free, non-abrasive cloth.
2. Lift up the ADH.
3. Identify the flat, dark gray paper guide on the right-hand, underside of
the DADH. The paper guide is a long, flat piece of ribbed plastic, 5
inches from the right-hand side of the DADH. The paper guide is
approximately 13 inches in length and 1 inch wide and pivots in the
right/left motion when touched. This part also has two "cutouts" in it with
two rollers resting in the cutouts.
4. Rub the cloth in the right-to-left motion across the paper guide, starting
at the back of the scanner, working your way to the front.
Be careful not to dislodge the thin belt near the roller closest to the front
of the scanner.
The system may inadvertently white-fill small "blocks" (~3-5 mm in size) of
a scanned image in areas of the original that are similar to the pattern on
the document feeder paper guide. To eliminate these white-fill blocks,
disable the "Hole Fill" option.
The "Reprocess" command does not eliminate holes.
If a "Preview" of an image is made with "Hole Fill" turned off, and
"Reprocess" is selected with "Hole Fill" off or on, the holes will not be
removed from the previewed image. Holes will be removed from the final
scan "Accept".
Scanning photographs through the document handler is not recommended
due to the potential for damaging the original, as well as the susceptibility of
"streaks" in the resultant scanned image.
Windows < 0.5" x 0.5" are categorized as "background" and subsequently,
are processed differently from nearby windows (documents with a lot of
"small sized" content, such as maps with "landmarks" on them, are most
susceptible to this type of failure). This also occurs when scanning originals
with light shades of yellow and blue.
NOTE: If this problem occurs, the document should be scanned in a
different orientation, or off of the platen glass.
X
F
EROX
REE
CAUTION
C
S
R
USTOMER
OFTWARE
F
S
665
LOW
CANNER
S
ELEASE
UPPLEMENT