Xerox 460 Manuale di installazione rapida - Pagina 18
Sfoglia online o scarica il pdf Manuale di installazione rapida per Copiatrice Xerox 460. Xerox 460 38. Macintosh driver information
Anche per Xerox 460: Manuale informativo (13 pagine)
Stampa la pagina
Microsoft Windows 2000 LPR and IPP Printing Quick Install Card
Xerox Document Centre 460/470 ST
are set to send print jobs to the default
port.
d)
If you wish to change the lpr port for
your printer press the port soft button
and enter the desired port number at
the keypad. Press Save.
e)
Press the Close button.
7.
Exit the Tools Menu
a)
Press the Exit Tools button.
8.
Prepare for printer installation
a)
Proceed to the next section of this
procedure called Go to the server
and...
Go to the Server/Workstation and...
1.
Verify the correct software is loaded
a)
At the Desktop, right mouse click the
My Network Places icon and select
Properties. Right mouse click on the
Local Area Connection icon and
verify that the Internet Protocol (TCP/
IP) protocol has been loaded.
2.
Add the printer
a)
Open the Control Panel and double-
click Printers icon. Double-click Add
Printer. The Add printer Wizard starts.
b)
Verify that Network Printer is selected
and click Next>.
c)
The Locate your Printer screen will
appear.
d)
Follow the steps to Create a LPR
printer below OR Create an IPP printer
in the right column.
To create a LPR Printer
a)
Select Local Printer; deselect Auto-
matically detect and install my Plug
and Play printer. Click Next.
b)
Select Create a new port and choose
Standard TCP/IP port from the pull-
down menu. Click Next twice.
c)
Enter the Printer Name or its IP
address. The Printer Name can be
either the Host Name or the SMB Host
Name as shown on the configuration
report, depending on the name
resolution used (WINS or DNS). The
Port Name is automatically filled in for
you but you can change it if you want
to. Click Next.
d)
The Wizard will automatically detect
the Printer Model for you. If that does
not happen select Standard and
choose the your Printer Model from
the pull-down menu.
e)
Click Finish. Go to Step 3.
Page 2
Create an IPP printer
a)
Select Network Printer. Click Next.
b)
Select Connect to a printer on the
Internet or on your intranet. Type
http://
followed by the printer's name or
IP address in the URL field. The Printer
Name can be either the Host Name or
the SMB Host Name as shown on the
configuration report, depending on the
name resolution used (WINS or DNS).
Click Next.Click OK to install the printer
driver. Go to Step 3.
3.
Select the driver to be used (Document
Centre drivers are included on the
Windows 2000 CD-ROM)
a)
A driver list will be displayed. Select
Xerox from the Manufacturers: area.
Then select the desired print driver from
the Printers: and click OK. The driver
wil be installed.
b)
The Default Printer window will open.
Select Yes to make this the default
printer, otherwise click the Next> button.
At the Completing the Add Printer
Wizard screen, click the Finish button.
c)
Print a Test Page. Verify that it prints.
Repeat this Go to the Server/
Workstation and... procedure for each
workstation on the network that will print
to the printer.