Xerox DocuColor 242 Nota di rilascio - Pagina 4

Sfoglia online o scarica il pdf Nota di rilascio per Copiatrice Xerox DocuColor 242. Xerox DocuColor 242 41. Docucolor advanced multifunction
Anche per Xerox DocuColor 242: Manuale delle funzioni (12 pagine), Manuale d'uso (32 pagine), Manuale del valutatore (14 pagine), Manuale del valutatore (16 pagine)

Copier trays

Setup

No out-of-toner message on copier while printing

If a toner must be replaced while a job is printing, a message appears in Command

WorkStation, but the copier does not display a message until it is finished printing.

You can replace toner while the copier is printing.

Tray 5 (Bypass Tray)

To print a job using the Bypass Tray, you must specify Tray 5 (Bypass Tray) at print time in

the printer driver. There is no Setup option by which the administrator can set a default.

Tray 6 (Oversized) and Media type

Printing a job with Media Type set to Tab Stock 1 or Tab Stock 2 is not supported when

printing from Tray 6 (Oversized). Use Tray 5 (Bypass) to print with Tab Stock 1 or Tab Stock

2. For printing thick media from Tray 6 (Oversized), set the Media Type to Heavyweight 1,

Heavyweight 2, Heavyweight 3, Coated 1, Coated 2 or Coated 3.

Tray 8 (Inserter)

The Inserter tray is used to insert blank or pre-printed pages which will bypass the copier's

fuser. Tray 8 (Inserter) may be used to insert blank sheets for the Slip Sheet Paper Source,

Transparency Interleave Source, and the Mixed Media Insert Blank options. Tray 8 (Inserter)

may also be used for pre-printed pages, Tab stock, or any media that should not pass through

the fuser.

Tray 8 (Inserter) is not supported for the following Mixed Media options: Define Cover

OTE

and Define Page Range.

There is no Tray 7 (by product design).

OTE

General Setup using copier touch panel

When you select General setup (Setup > Printer Setup > General) from the copier touch

panel, the Save and Cancel buttons appear outside the General screen. To access the Save and

Cancel buttons, you need to scroll to the bottom-left of the screen.

Fiery Color Server device name

For DocuColor 242/252 and DocuColor 260 copiers, the Fiery Color Server device names

are DC250 or DC260 respectively. Use these device name when starting applications such as

Command WorkStation and ColorWise Pro Tools.

Server name

You cannot assign the server the same name as the device name (DC250 or DC260). If you

assign the same name, utilities may not function properly.

Page 4