Locate the media package labeled Setup Disks that shipped with the Splash M Series Color
Server. The package contains two sets of Copier Configuration diskettes; one set is labeled
U.S. and the other set is labeled European.
• If your site uses default Imperial page sizes, configure the server using the U.S. Copier
Configuration diskettes.
• If your site uses default metric page sizes, configure the server using the European
Copier Configuration diskettes.
The Copier Configuration diskette contains a file called DP.INI, which has the parameters
for configuring the network, print/hold queue, and page parameters for the Splash M Series
Color Server.
DP.INI is a text file that can be modified on a user workstation with a standard text editor.
There are no protected fields in the file.
Edit only the parameters after the equal signs (=).
Do not delete any comment symbols.
If you are printing through Novell servers, you must create a queue and color server account
for the Splash M Series Color Server using PCONSOLE. For a complete description of
PCONSOLE, or more information about Novell print servers, refer to your Novell documen-
tation.
If users are printing through a Novell print server, complete the following steps.
1. Log into the file server where the Splash M Series Color Server queue will reside.
If you are using NetWare 3.x, log in as Supervisor from an attached workstation.
If you are using NetWare V4.0 or greater, log into the server administrator account,
adding the /bs switch to the login command.
2. Note the file server's name. This is the name you will use in the DP.INI file for the
pq0novserver and pq1novserver parameters.
3. In the PUBLIC subdirectory on SYS: volume, enter the command PCONSOLE.
4. To create a print server account for the Splash M Series Color Server:
a. From the PCONSOLE Main menu, select Print Server Information.
b. Press the Insert key and enter the print server account name. The name cannot
contain more than 12 characters and cannot contain special characters or spaces.
Do not enter a password. Leave the password field blank.
c.
Press Enter.
5. Make note of the name you entered. This is the name you will use in the DP.INI file for
the pq0novpserver and pq1novpserver parameters.
6. Press the Escape key multiple times to return to the main menu.
7. To create a print server queue for the Splash M Series Color Server:
a. From the main menu, select Print Queue Information.
0015647-0001 February 18, 1999
Getting Started Guide
page-5
Stampa la pagina