Direct power BH26S3 Manuale operativo e di sicurezza - Pagina 3

Sfoglia online o scarica il pdf Manuale operativo e di sicurezza per Martello rotante Direct power BH26S3. Direct power BH26S3 17. 5kg sds plus rotary hammer drill

Stampa la pagina

SAFETY INSTRUCTIONS

WARNING! Read all instructions.Failure to follow all instructions listed

below may result in electric shock, ﬁre and/or serious injury.

SAVETHESE INSTRUCTIONS

1. Work area.

a. Keep work area clean and well lit. Cluttered and dark areas invite

accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of ﬂammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety.

a. Power tool plugs must match the outlet. Never modify the plug in

any way. Do not use any adapter plugs with earthed (grounded) power

tools. Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat,oil,sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable

for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

f. Use a Residual Circuit Breaker on all 230V Power tools. This can help

minimise the risk of an electrical shock if an earth fault or short circuits occurs.

g. If using a power cable extension ensure that the cable is fully unwound

and that its length is less than 30m. Lengths over 30 m will effect the tools

performance as a result of voltage drop.

3. Personal safety.

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inﬂuence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b. Use safety equipment. Always wear eye protection. Safety equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal injuries.

c. Avoid accidental starting. Ensure the switch is in the off-position

before plugging in. Carrying power tools with your ﬁnger on the switch or

plugging in power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool

5kg SDS Plus Rotary Hammer Drill BH26S3