Xerox C11 - DocuPrint Color Inkjet Printer Manuale del software - Pagina 42

Sfoglia online o scarica il pdf Manuale del software per Accessori per stampanti Xerox C11 - DocuPrint Color Inkjet Printer. Xerox C11 - DocuPrint Color Inkjet Printer 47. Platen cover
Anche per Xerox C11 - DocuPrint Color Inkjet Printer: Manuale d'uso (2 pagine), Manuale del modulo (2 pagine), Scheda di installazione rapida (2 pagine), Manuale (28 pagine), Manuale di installazione dello stativo (4 pagine), Manuale di installazione (2 pagine), Manuale di installazione (2 pagine), Manuale di installazione (2 pagine), Manuale di installazione (2 pagine), Manuale di installazione (2 pagine), Manuale di installazione (1 pagine), Manuale di installazione (1 pagine)

5 Operation on Macintosh Computers

Output Destination - Specifies the output destination.

NOTE: The items that can be selected vary according to whether the optional side tray

kit or finisher has been installed.

Offset Stacking - The position of individual jobs or sets of copies are shifted to either

side of the output tray to enable easy separation.

Collated - Selects whether to collate a multiple-page file per set when they are printed.

This function is enabled when the printer HDD kit is installed.

Feed Separators from - Specifies the paper tray that transparency dividers are to be

fed from. When [Auto] is selected, the tray set on the machine is used as the feed

destination.

Print on Separators - Specifies whether or not to print on the transparency dividers as

well as the transparency.

Paper Type (Separators) - Specifies a paper type for the transparency divider.

Bypass Feed Orientation - Specifies the paper orientation when printing from the

bypass tray. When feeding the short edge of the paper first, select [Landscape]. When

feeding the long edge of the paper, select [Portrait].

Paper Type/Media - Specifies a paper type for the transparency divider.

Halftone - Select the halftone settings for printing.

Select [Fine Dots] for the small size halftone dot commonly used in PostScript.

Select [Thick Dots] for coarser dots than the Fine Dots setting.

Select [Type 3] for the same halftone setting that is used in PCL.

Image Enhancement - Specifies whether or not to use the Image Enhancement

function. Selecting [On] smooths out boundaries when printing. This reduces jagged

edges by artificially increasing the resolution of the image. When printing a bitmapped

image composed of coarse halftone dots, smooth color gradation is impossible in

certain situations. In this case, select [Off].

Draft Mode - Specifies whether or not to reduce the amount of toner used when

printing drafts. When [On] is selected, the overall printed color becomes lighter. This is

best for printing documents when high print quality is not necessary.

Custom Paper Auto Orientation - Specifies whether or not to correct the orientation

of the custom paper.

Substitute Tray - Specifies what action to take when the paper for the print size is not

loaded in the machine.

Use Printer Settings - Use the printer settings. The settings can be confirmed on

the control panel.

Display Message - Display paper supply messages on the control panel. Printing

is impossible until paper is supplied.

Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically

adjusts the image size as necessary.

Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same

size as the image.

Xerox WorkCentre 118 Postscript® User Guide