Xerox Document WorkCentre 450c Manuale di riferimento

Sfoglia online o scarica il pdf Manuale di riferimento per Accessori per stampanti Xerox Document WorkCentre 450c. Xerox Document WorkCentre 450c 2. Feed roll cleaning kit

Stampa la pagina
CUSTOMER SELF SERVICE
Feed Roll Cleaning Kit
Xerox -
DOCUMENT
The purpose of the instructions is to provide a step by step procedure to correct a paper feed problem. Read all
the instructions before performing this procedure.
Contents of kit:
CUSTOMER PREPARATION:
Unpack the repair kit and read the Repair Instructions.
F
NOTE: Good lighting is required in order to
see inside the WorkCentre
ü
q
Check off the box after each Step is completed.
q
1.
Remove all paper and the clear plastic Printer
Output Tray in front of the paper tray. (See Figure 1)
q
2.
Insert approximately a ¼ inch thick stack of
20 lb. paper (measure it) into the Paper Tray.
q
3.
Insert the Feed Roll Cleaning Pad (provided in
Kit) in front of the paper stack (Long-Edge-Down) with
the green side (coarse side) facing out.
709P00850 Rev A
WorkCentre
Feed Roll Cleaning Pad
450c
/
450cp
(continued)
March 2000
DRB-FILE
450c
/
450cp
Repair Instructions
Step 1:
Remove all
paper and the
clear plastic
Printer Output
Tray
Printer Output
Tray
Bottom of
Paper Tray
Figure 1. Inserting the Feed Roll Cleaning Pad
into the Paper Tray
¼ inch Paper
Stack
Feed Roll
Cleaning Pad
with the green
side facing out
Step 2:
Insert approximately a ¼
inch thick stack of paper
into the Paper Tray and
insert the Feed Roll
Cleaning Pad in front of the
paper stack with the green
side facing out
3 Feed Rolls are in
front of the Pad
Page 1 of 2