Xerox DocuPrint C3055 DX Manuale delle impostazioni - Pagina 14

Sfoglia online o scarica il pdf Manuale delle impostazioni per Accessori per stampanti Xerox DocuPrint C3055 DX. Xerox DocuPrint C3055 DX 20. Internal hard disk
Anche per Xerox DocuPrint C3055 DX: Manuale di installazione (8 pagine), Manuale di installazione (16 pagine), Manuale delle impostazioni (33 pagine), Manuale di installazione (16 pagine)

2.2

Setting the PCL Mode Menu

This section explains the items in the PCL mode menu and how to configure them.

The items that can be set in the PCL mode menu are as follows:

Paper Tray

Sets the paper tray to be used when printing.

The following options are available:

[Auto] (default)

When [Auto] is selected, the printer searches for the paper tray that contains the paper that

matches the [Output Size] setting and automatically feeds paper from that paper tray.

[Tray 1]

[Tray 2]

[Tray 3]

[Tray 4]

[Bypass Tray]

Note

• When [Auto] is selected, and if the paper of the same size is loaded in more than one paper tray, the

printer selects a tray based on the tray priority setting of a common menu.

• [Tray 2] - [Tray 4] are displayed only if the 500 sheet feeders (optional) are installed.

Output Size

Sets the size of the paper to be used when printing.

The following options are available:

[A4] (default)

[A3], [A5], [B4], [B5]

[8.5 x 11], [8.5 x 13], [8.5 x 14], [11 x 17], [7.25 x 10.5]

[Env 4.1 x 9.5], [Env 3.9 x 7.5], [Env 110 x 220mm], [Env 162 x 229mm]

[100 x 148mm]

[Custom]

When [Custom] is selected, set the print orientation to [Portrait (Y)] or [Landscape (X)].

Orientation

Sets the print orientation to [Portrait] (default) or [Landscape].

2 Sided

Sets whether or not to print 2 sided by selecting [On] or [Off] (default).

When [On] is selected, set the binding orientation to [Flip Long Edge] or [Flip Short Edge].

Note

• On the DocuPrint C3055, this item is displayed only if the duplex unit (optional) is installed.

Font

Sets the font to be used when printing. The default is [Courier].

Symbol Set

Sets the font for symbols. The default is [ROMAN-8].

2 Setting the PCL Mode