Xerox 6100BD - Phaser Color Laser Printer Manuale d'uso - Pagina 18

Sfoglia online o scarica il pdf Manuale d'uso per Software Xerox 6100BD - Phaser Color Laser Printer. Xerox 6100BD - Phaser Color Laser Printer 32. Disk overwrite installation and usage
Anche per Xerox 6100BD - Phaser Color Laser Printer: Manuale di installazione (34 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (32 pagine), Opuscolo e specifiche (4 pagine), Manuale d'uso (28 pagine), Manuale di installazione (2 pagine), Manuale di sicurezza (38 pagine), Manuale di installazione (2 pagine), Nota di rilascio (2 pagine), Manuale introduttivo (37 pagine), Manuale (34 pagine), Manuale (34 pagine), Manuale introduttivo (34 pagine), Manuale (11 pagine), Manuale di installazione e funzionamento (8 pagine)

Setting the font resolution for the queue

Before sending a document to a print queue, you must make sure

that the resolution of the font used in the document is the same as

that specified for the queue.

If the font and queue resolutions do not match (for example, a

document with a 600 dpi font is sent to a 300 dpi queue), the font

may print with subtle distortions and could be rejected at the bank.

Follow this procedure to set the font resolution as a queue

property:

1. Select the Queue pull-down menu, and select Queue

Manager.

2. On the Queue Manager window, right-click the desired queue

name, and select Properties from the pop-up menu.

3. From the Format menu on the Properties window, select the

appropriate default format for the Print Description Language

(PDL) used in your MICR jobs.

4. Select the PDL Settings tab and select the desired

decomposer (PostScript/PDF, PCL, or LCDS).

5. Select the resolution.

NOTE 1: When selecting the resolution for PCL, you must select

the Override icon if the PCL job does not explicitly specify 600 dpi

as the PCL Unit.

NOTE 2: 1200 by 600 dpi is not a valid resolution for the DP 100/

115/135/155/180 EPS. Selecting this option may result in job

errors.

NOTE 3: Ensure that the font and queue resolutions match. If the

font and queue resolutions do not match, the font may print with

subtle distortions that could cause the form to be rejected.

6. Click OK.

You can change the font resolution for an individual job from the

Job Manager window.

1. On the Job Manager window, right-click the job you want to

change, then select Properties from the pop-up menu.

2. On the Properties window, select the Image Quality tab.

3. From the Resolution menu, select the desired resolution

option.

4. Click OK.

MICR User Guide