Xerox 721 Manuale di formazione per i clienti - Pagina 12

Sfoglia online o scarica il pdf Manuale di formazione per i clienti per Software Xerox 721. Xerox 721 50. Software tools
Anche per Xerox 721: Manuale dell'operatore (11 pagine), Manuale di configurazione (20 pagine), Nota di rilascio (23 pagine), Nota di rilascio (8 pagine)

Help Files Installation

In the browser URL box enter http://

followed by the printer's IP address, (for

example, http://13.240.20.38). If you don't

know the printer's IP address, see your

System Administrator or the test print set

produced at the time of your printer's

installation. When the power is switched

on, the controller also sends a test print to

the 721P printer.

6030/6050 WIDE FORMAT printers only:

Configure Remote Printer Page as follows.

Select PRINTER DEFAULTS >

UTILITIES > Configure Remote

Printer.

Put in the IP address of the remote

printer, and the job queue name of that

printer, where FreeFlow Accxes will

send the print job data to the 6030/6050.

The remote job queue is in the plt (00-

99) format, with an extension letter of t,

c, h, p, v, or NONE. Your choices will

show on the screen, for example:

(plt00t).

An example queue name is

"plt99" when NONE is selected.

Press the Update Remote Printer button

to set your choices.

Select Printer Defaults > Network. Check

that the Subnet Mask, IP Address, and

Gateway settings are correct. These are

needed so that your workstation will be

able to communicate with your FreeFlow

Accxes compliant Scan System and printer.

Do the following to load the help files, so that

you will be able to access them

Click on PRINTER DEFAULTS >

UTILITIES > Install Help Files and the

Install Help Files page will display. If you

entered the printer password from the

Session Setup link on the Main Menu, and

the FreeFlow Accxes Controller has a hard

disk, you can use this page to upload the

Web Printer Manager Tool help files to the

printer's hard disk.

FreeFlow Accxes Software Tools Training Guide