Xerox 850DP - Phaser Color Solid Ink Printer Nota di rilascio - Pagina 13

Sfoglia online o scarica il pdf Nota di rilascio per Software Xerox 850DP - Phaser Color Solid Ink Printer. Xerox 850DP - Phaser Color Solid Ink Printer 33. Installation guide for accxes 10.2
Anche per Xerox 850DP - Phaser Color Solid Ink Printer: Specifiche tecniche (2 pagine), Manuale dell'operatore (16 pagine), Manuale supplementare (1 pagine), Manuale supplementare (11 pagine), Manuale di configurazione (1 pagine), Manuale di istruzioni per la pulizia (9 pagine), Manuale di aggiornamento (8 pagine), Manuale supplementare (26 pagine), Nota di rilascio (11 pagine), Nota di rilascio (11 pagine), Istruzioni per l'installazione (2 pagine)

7.6 Support for 30 inch roll on 6030/6050 printer

Support of 30 inch rolls on the 6030/6050 printer changed for version 3.2.00. Version 10.1 of

AccXES supports 3.2.00 version of 6030/6050 printer and later. See you local Service

Representative for proper installation and configuration of the 3.2.00 printer firmware.

The main feature for this release is the security feature, disk image overwrite. This feature

provides a means to securely overwrite the entire hard drive, or setup the system to securely

overwrite image data when it is no longer needed, i.e. the job has printed. Details of this feature

can be found in the "Release Notes" section of this document.

This feature allows users to scan documents to one of four FTP destinations. The destinations

MUST be setup by the system administrator. See the "Release Notes" section of this document

for more details.

This feature allows the user to specify the maximum output length of a copy. The maximum

length can be changed via the scanner UI in the following location:

MENU>CONFIGURATION>COPY OPTIONS>IMAGING>MAXIMUM COPY LENGTH

NOTE: The maximum copy length defaults to the maximum length that the attached printer

can print. For the 8825, 8830, 8850, and 510 Series this value is 1200 inches. For the 721P

this is either 6 meters or 16 meters based on the configuration of the printer. For the 6030

and 6050 this value defaults to 3 meters.

Page 13