Xerox DC 230 LP Suggerimenti e trucchi - Pagina 3

Sfoglia online o scarica il pdf Suggerimenti e trucchi per Software Xerox DC 230 LP. Xerox DC 230 LP 4. Upgrading the windows nt pstscript driver

Changing server driver defaults from a remote workstation

Issue 2

You must administer the printer from the server or workstation where is installed.

When using a client/server printing model where the driver is loaded on the NT server and

" shared" on the client workstation, NT allows you to change the server driver default settings

from any workstation on the network. If you attempt this with the Xerox NT Postscript driver,

you may experience " Out of memory" or " Invalid handle" errors.

Workaround

Alter the default settings of the driver only from the server console.

Also, do not select <OK> in the driver defaults dialog (from a remote workstation) because

the buffer overflow may occur even though you do not have sufficient rights to change these

defaults.

Glossary

In a Client/Server driver setup, you are installing a driver on an NT server and sharing the

printer with other NT servers and workstations (clients). The driver default settings and

configuration are maintained solely by the administrator. Part of the driver is installed on the

client; part resides on the server. Select [Network Printer] during installation and specify an

NT server with the correct driver already loaded.

In a Client-direct-to-printer setup, you are installing a driver on a PC that is connected to

the printer without any NT server driver needed. The print driver is located completely on the

client and the data is transported to the printer without modification. This " direct-to-printer"

setup might send the data via LPR to the printer, via a Novell print queue, via a Banyan print

queue, etc. The printer defaults and configuration are maintained by each user at their PC

and they can be different for different users. Select [My Computer] during installation or

select [Network Printer] but do not specify an NT server-shared printer.

Troubleshooting

Generally, problems with the installation can be solved by re-installing the driver and

following these instructions carefully. The most common problem is that the driver

installation files were not updated on the NT station correctly. The step of installing a new

printer is the step that installs these files.

The symptoms of a problem installation would include features that can not be set to the

desired value or features not working as expected (i.e., pink stock instead of white). The

simplest way to verify that the files are installed correctly is to print a document to file and

then edit the " print-ready" file. The top 2 lines should read:

%!PS-Adobe-3.0

%%Driver: Xerox Doc Centre 220/230 PS2 1.xx.xx yy.mm.dd.

where 1.xx.xx refers to the driver version. Ensure that this matches the version that you

installed and the version shown in the [Help: About] box.

DC98CC09

Page 3 of 4

A Publication of the Digital Solutions & Support Centre