Xerox DocuPrint 135 Manuale supplementare - Pagina 27

Sfoglia online o scarica il pdf Manuale supplementare per Software Xerox DocuPrint 135. Xerox DocuPrint 135 48. Tape client job submission guide enterprise printing system
Anche per Xerox DocuPrint 135: Manuale operativo (38 pagine), Specifiche tecniche (2 pagine), Manuale operativo (34 pagine), Manuale di riferimento (2 pagine), Manuale di pianificazione (20 pagine), Manuale di riferimento (42 pagine), Riferimento rapido (2 pagine)

Tape Client Job Submission Guide

Managing and printing jobs from the Tape Client

7. From the Printer pulldown menu in the Output Control group

box, select the EPS printer to which you are sending the job

(for instructions on setting up a printer and the Socket

Gateway, refer to the chapter "Managing the tape client" or

the online help for information on the Socket Gateway.)

8. From the Queue pulldown menu, select the queue to which

you want to send the job. The queue must be set up for

LCDS printing. (Refer to the Help screens accessed from the

Queue Manager window for instructions on setting up

queues.)

9. In the Document group box, select the initial JDL, JDE, and

form (if applicable). (Refer to "Specifying the JDL, JDE, and

form to start a job.")

10. In the Quantity field, click the arrow buttons until the desired

copy quantity is displayed.

11. In the End of Job field in Input Control group box, select the

action that the tape drive will take at the end of the job.

Figure 2-2. End of Job field on Tape Client window

•

If you do not check any fields, the tape will not rewind and

will not upload.

•

Rewind Tape will cause the tape to rewind at the end of

the job.

•

Unload Tape will cause the tape to unload at the end of

the job.

12. In the Input Control group box, click Start to begin printing.

13. While jobs are being received and printed, you can check the

Status column on the Job Manager window for the current job

status. (Refer to "Checking job status.")

2-3