Xerox DocuPrint 180 Manuale di pianificazione - Pagina 34

Sfoglia online o scarica il pdf Manuale di pianificazione per Software Xerox DocuPrint 180. Xerox DocuPrint 180 38. User job submission quick reference card
Anche per Xerox DocuPrint 180: Manuale operativo (38 pagine), Specifiche tecniche (2 pagine), Elenco dei codici (16 pagine), Scheda di riferimento rapido (2 pagine), Scheda di riferimento rapido (2 pagine), Manuale di riferimento (42 pagine), Riferimento rapido (2 pagine), Manuale supplementare (48 pagine), Scheda di riferimento rapido (2 pagine), Manuale di riferimento (2 pagine)

C.P. Bourg Document Finisher (BDFx)

Limitations

•

A Finisher Transport Module is required for in-line

connectivity to the printer.

•

A slight Cover Feeder feed mechanism adjustment may be

necessary when changing cover weights (lightweight stocks

may require a more precise adjustment).

•

For 11" x 17" / A3 simplex single fold only documents, paper

weight greater than 20 lb (80 gsm) are recommended.

•

For 8.5" x 11" / A4 simplex single fold only documents, the

N-1 face up orientation is required.

•

Currently coated stock is not recommended.

•

The BDFx can only be guaranteed to work to its maximum

book thickness when feeding (8.5 x 11 / A4) paper if the

paperweight is 90 gsm or less. (Long grain paper with a

weight above 90 gsm should be tested with the customer

paper and application before selling the BDFx.)

•

Use of short grain paper is highly recommended for 11 x 17"

/ A3 sized paper.

•

The Finisher Transport Module is required for in-line

connectivity to the printer.

•

Currently, a Xerox Document Stacker 5000 must be installed

in-line with the printer and the BDFx.

•

If there is a transition of an existing BCFx to a Nuvera Digital

Production System, an upgrade is needed.

Note: In case the floor at the customer site is very uneven, it is

recommended that the Nuvera IOT is installed and leveled with a

Caster Leveling Kit (kit number 498K07900).

6-2