Xerox Phaser 6100DN Manuale introduttivo - Pagina 19

Sfoglia online o scarica il pdf Manuale introduttivo per Software Xerox Phaser 6100DN. Xerox Phaser 6100DN 34. Disk overwrite installation and usage
Anche per Xerox Phaser 6100DN: Manuale di installazione (34 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (32 pagine), Opuscolo e specifiche (4 pagine), Manuale d'uso (28 pagine), Manuale di installazione (2 pagine), Manuale di sicurezza (38 pagine), Manuale di installazione (2 pagine), Nota di rilascio (2 pagine), Manuale introduttivo (37 pagine), Manuale (34 pagine), Manuale (34 pagine), Manuale d'uso (32 pagine), Manuale di installazione e funzionamento (8 pagine)

3. DocuSP 4.2 Software Release

Information

The sections in this chapter cover known issues with the

DocuSP 4.2 software and supporting applications.

The following table details the caveats for the DocuSP 4.2

software and indicates which, or all, printer products to which

the caveat applies.

These caveats are planned to be fixed in a future release of

the DocuSP software. If you encounter one of these caveats

that impact your print production, contact your Xerox support

representative.

Caveat

The LCDS Tape Client updates were

incorrectly documented as being available in

earlier versions of the Getting Started and in

the 4.1 to 4.2 Differences Document. The

Tape Client updates are not available in this

release of DocuSP.

For optimal operation of the DocuSP IPDS,

follow these guidelines:

1. Do not Pause the printer to continue

RIPping a job while deferring printing.

Continue the processing and printing of

an IPDS job before attempting to print

another job.

2. Do not use Reposition Output on an IPDS

job.

3. Select 1 to N printing as a default. If N to

1 printing is necessary, set the maximum

set size for the finisher to the actual

finisher capacity, and do not direct jobs to

the finisher that are larger than the

finisher can accommodate.

Specific printer status problems are not

described with Intervention Required

messages. Only a generic message is sent.

Ensure that the print shop management

process does not depend upon the printer

providing a specific description of the error.

Applicable printer product

All applicable LCDS printers

All applicable IPDS printers