Xerox Synergix 8850 Manuale di configurazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di configurazione per Software Xerox Synergix 8850. Xerox Synergix 8850 20. Windows nt 4.0 postscript print driver user guide
Anche per Xerox Synergix 8850: Nota di rilascio (23 pagine), Nota di rilascio (8 pagine), Manuale di formazione per i clienti (50 pagine), Manuale del software (30 pagine)

Security

Any user can view the Web Print Management Tool pages. The printer is required to make any

changes. The default password is the number 0, so it needs to be changed in order to preserve

your settings from being changed by others.

1. In the Web Print Management Tool, click on UTILITIES and then PASSWORD.

2. When the Password page displays, enter the current printer password in the designated

field (a number in the range 0 to 99999). For security reasons, the asterisk character

appears for each password digit.

3. Enter the new printer password and then again to verify.

4. Press the Update Printer button. If the entered password matches the correct system

password, you have write-access to the printer settings. The FreeFlow Accxes Controller

will send back a message stating either "Password verification passed" or "Password

verification failed."

You need to configure 4 FTP destinations for scanned images in the Web Print Management

Tool. Once a scan destination has been configured, Scan System users can choose a

destination via the Sample key on the scanner control panel. The scanned image will be sent to

the selected FTP destination and no file will remain on the controller's hard disk. Select

CONFIGURATION > SCANNER. Select the Help file for more information.

This security feature provides for 3-pass overwrite and 1-pass verification of all image data

temporarily stored on the Accxes hard drive. The feature has two modes: Immediate Image

Overwrite (IIO) and On-Demand Image Overwrite (ODIO). In the Web Print Management Tool,

select CONFIGURATION > SECURITY SETTINGS> Change Immediate Image Overwrite.

Select the HELP file for more information.

Enabling the Scan System to communicate with

the FreeFlow Xerox Wide Format Printer

In the Web Print Management Tool, select CONFIGURATION > PRINTER > DDS ENABLED. Be

sure that the DDS Enabled checkbox is selected. If it is not selected, than the COPY/SCAN

functionality will be disabled.

FreeFlow Accxes Printer System and Web Print Management Tool Setup Guide