Xerox WORKCENTRE C2424 Manuale d'uso - Pagina 28

Sfoglia online o scarica il pdf Manuale d'uso per Software Xerox WORKCENTRE C2424. Xerox WORKCENTRE C2424 43. Copier-printer
Anche per Xerox WORKCENTRE C2424: Manuale di riferimento rapido (14 pagine), Opuscolo (8 pagine), Manuale supplementare (7 pagine), Specifiche tecniche (6 pagine), Manuale introduttivo (26 pagine), Manuale d'uso (21 pagine), Manuale d'uso (20 pagine), Manuale di manutenzione (20 pagine), Manuale d'uso (19 pagine), Manuale di istruzioni (16 pagine), Manuale (12 pagine), Manuale di istruzioni (6 pagine), Manuale di installazione (4 pagine), Manuale di installazione (2 pagine), Sostituzione del kit del rullo di alimentazione (2 pagine), Manuale di configurazione (2 pagine), Modello di accessibilità volontaria dei prodotti (10 pagine), Confronto competitivo (3 pagine), Manuale di riferimento rapido (14 pagine), Manuale di servizio (11 pagine), Manuale di riferimento rapido (13 pagine)

Stampa la pagina
Xerox WORKCENTRE C2424 Manuale d'uso
Changing a PhaserPort IP Address
If the system's IP address is changed, you must change the IP address for the device's
corresponding port:
1.
Click Start, click Settings, then click Printers.
2.
Right-click the system to be changed to a new PhaserPort IP address, then click
Properties.
3.
Select the Details tab.
4.
Verify that PhaserPort appears in the Print to the Following Port field.
5.
Click Port Settings. The Configure PhaserPort dialog box appears.
6.
Do one of the following:
a.
If you know the correct IP address or DNS name for the system, enter that
information.
b.
If you don't know the system's IP address or DNS name, then click Browse to display
a list of systems on the network.
c.
Double-click the appropriate system. PhaserPort automatically enters the information
into the Configure PhaserPort dialog box.
Note
To search the network again, click Refresh. To expand the search to other subnets,
click Advanced.
7.
Click OK.
8.
Click OK again to apply the changes.
Windows 98 and Windows Me Troubleshooting
This troubleshooting section assumes you have completed the following tasks:
■
Verified that the system is plugged in, turned On, and connected to an active network.
■
Installed a PCL or PostScript device driver.
■
Verified that the system is receiving network information by monitoring the LEDs on the
back of the device or on the CentreDirect External Print Server. When the system is
connected to a functioning network and receiving traffic, its link LED is green, and its
amber traffic LED is flashing rapidly.
■
Printed and kept a current copy of the "Configuration Page".
WorkCentre® C2424 Copier-Printer
6-28
Windows 98 and Windows Me