Xerox Phaser 6100DN Manuale - Pagina 29

Sfoglia online o scarica il pdf Manuale per Server di stampa Xerox Phaser 6100DN. Xerox Phaser 6100DN 34. Disk overwrite installation and usage
Anche per Xerox Phaser 6100DN: Manuale di installazione (34 pagine), Specifiche tecniche (2 pagine), Manuale d'uso (32 pagine), Opuscolo e specifiche (4 pagine), Manuale d'uso (28 pagine), Manuale di installazione (2 pagine), Manuale di sicurezza (38 pagine), Manuale di installazione (2 pagine), Nota di rilascio (2 pagine), Manuale introduttivo (37 pagine), Manuale (34 pagine), Manuale introduttivo (34 pagine), Manuale d'uso (32 pagine), Manuale di installazione e funzionamento (8 pagine)

New Features And Updates For EPS Products Only

DocuSP 4.1 to 4.2 Differences Document

DocuSP 4.2 enables users to select and print single or

multiple LCDS reports from the DocuSP Tape Client

GUI. If multiple reports are desired, the reports must be

specified in ascending order with a position relative to

the beginning of the container.

The user can specify a range of reports from a file for

printing. The report range applies to the first file in the

file range only, and uses the same format as the file

range. The maximum length for the report range is set

to 120 characters.

The Tape Client GUI is modified to support Reporting.

The File Ranges panel is renamed to Tape File

Selections. Within this panel, a new radio button for

Reports and a text field for Report Ranges are added.

GUI behaviors

♦ Selecting All: the Tape Client GUI prints all files on

the tape as in DocuSP 4.1.

♦ Selecting Range: the Tape Client GUI prints a

range of files on the tape as in DocuSP 4.1.

♦ Selecting Reports: The Tape Client GUI prints

reports from the first file specified in the Files text

field. If there is more than one entry in the Range

field, the subsequent entries are ignored.

DocuSP 4.2 introduces an update to the LCDS

accounting page. Prior to 4.2, only the initial JDL/JDE

was printed on the LCDS accounting page and saved

in the DocuSP accounting log. In 4.2, the Initial

JDL/JDE remains the same; however, the Current (or

Last) JDL/JDE is also printed on the LCDS accounting

page and saved in the DocuSP accounting log.