Direct Supply EZ-LIFT WHEELCHAIR SEAT Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Sedia a rotelle Direct Supply EZ-LIFT WHEELCHAIR SEAT. Direct Supply EZ-LIFT WHEELCHAIR SEAT 20.

Tools Required:

STEP 1 – Review For Compatibility Before Installation

Review chair for compatibility with lift seat and anti-rollback devices. See the Warnings,

Compatibility, and Installation sections of this manual and the anti-rollback device manual before

beginning installation.

STEP 2 – Remove Wheelchair

Sling Seat and Armrests

a. Remove your wheelchair's sling seat. Most

standard folding wheelchairs' sling seats are

attached with 8 to 10 screws which can be

removed using a phillips screwdriver. (figure 1)

b. Retain the seat and screws in a safe location.

c. Remove your wheelchair's armrests. The

armrests will remain on the chair after

installation but should be removed to provide

better access to the seat-mounting tubes

during installation. (figure 2)

Installation Instructions

Phillips Screwdriver

(or other tool(s) as

needed to remove

wheelchair sling seat)

2x 7/16" Wrenches

or Socket Wrenches

used to adjust

mounting bars

10mm Wrench and

Long-nose Pliers

used for Anti-rollback

Installation

3/16" Allen Wrench

used to adjust upper

lift force

Figure 1

Figure 2