Alderon Industries Oil Alert VA02 Manuale di funzionamento, manutenzione e installazione - Pagina 2
Sfoglia online o scarica il pdf Manuale di funzionamento, manutenzione e installazione per Sistema di sicurezza Alderon Industries Oil Alert VA02. Alderon Industries Oil Alert VA02 4. Alarm panel
Stampa la pagina
Oil Alert Remote Alarm
TM
Alarm Panel Model VA02 Operation, Maintenance
and Installation Manual
Installation of the Oil Alert Remote Alarm Continued
1. To install/replace the battery for the backup power feature, remove the access cover (Fig. 1) and install 9 VDC battery
(Duracell model MX 1604B2) (Fig. 2). After installing battery, press the test button (Fig. 3) to activate the alarm to make
sure the battery works properly. The power indicator, high oil indicator and high water indicator light should illuminate and
the buzzer should annunciate. If using the auxilary contacts, leave cover off until step 3 is completed. If you are not using
them, replace the access cover (Fig 4).
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
Remove Cover To Insert 9v
Battery. Replace Yearly.
Auxiliary Contacts Inside.
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
2. Determine mounting location for the Oil Alert Remote Alarm. Make sure power outlet is within 5 feet of the alarm (Fig. 5).
Make sure the outlet in on a separate circuit breaker from any other device and not on a switched receptacle to maintain
power integrity. Mount the alarm using two #6 self tapping screws (not included) (Fig. 6). Use #8 plastic anchor if mounting
to sheet rock. (Fig. 7).
5 ft max
(Fig. 5)
(Fig. 6)
(Fig. 7)
Alarm Systems
Control Panels
Float Switches
Leak Detection Systems
P/N
Page 2 of 4
PO Box 827
Hawley, MN 56549
(218) 483-3034
Fax (218) 483-3036
www.alderonind.com