Direct Supply Panacea AIR PRO Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Arredamento per interni Direct Supply Panacea AIR PRO. Direct Supply Panacea AIR PRO 20.

Preventive Maintenance & Storage

Control Unit

The controller contains no user serviceable parts. Any service required on the

controller should be referred to your Direct Supply representative.

Mattress

The Panacea Air Pro Mattress requires routine cleaning at least twice a week and

maintenance to ensure top performance. The caregiver should familiarize themselves

with the following information before maintaining the mattress.

Semi-Permeable Top Cover

The Top Cover must be in place when the resident is on the mattress and should be

removed and laundered periodically for sanitary reasons. Laundering instructions are

provided below. Additional Top Covers are available for laundry rotation. Please contact

your Direct Supply account manager for further information on additional Top Covers.

The Top Cover should be wiped off with an EPA registered disinfectant solution, rinsed

with fresh water, and wiped dry to remove stains and body fluids between launderings.

Caregivers should take care to make sure the Top Cover is not damaged by abuse.

Protect the Top Cover and air cells from cigarette burns, sharp objects, tears from

sharp objects and pin holes. DO NOT CLIP OR PIN ITEMS TO THE TOP COVER SUCH

AS NURSE CALL CORDS, RESIDENT LINES OR OTHER CABLES.

The advanced microclimate top cover is a performance fabric with a polyurethane

barrier on the top side and a stretchable membrane on the underside. The polyurethane

coating allows air and water vapor to pass through while stopping liquids from

penetrating the cover. The cover has a slick and soft surface to minimize shear forces

on the skin. The material is very soft to permit easy conformity to the skin surface.

Laundering the Semi-Permeable Top Cover

The Top Cover should be disinfected prior to washing with an EPA registered

disinfectant, washed with a commercial soap in a washing machine with a water

temperature of less than 150°F (65°C) with a full rinse cycle. The covers should be

immediately placed in a dryer set to low/delicate heat (less than 150°F/65°C) or hung

to air dry. Once dry, the covers can be bagged in plastic or immediately returned for

resident use.

The Air Cells

Air cells can be replaced easily in the event they become damaged. Immediately

replace any damaged air cells as they may prevent the mattress from reaching full

inflation. Air cells can be replaced by unsnapping each end of the air cell from the

mattress base and detaching the air inlet from the manifold.

Storage

1. Always store the support surface flat on a clean, level surface.

2. Avoid storage of other equipment on top of the support surface.