Yamaha AW4416 Supplemento al manuale - Pagina 5
Sfoglia online o scarica il pdf Supplemento al manuale per Strumento musicale Yamaha AW4416. Yamaha AW4416 48. Installing an internal hard disk
Anche per Yamaha AW4416: Manuale integrativo (1 pagine), Tutorial (34 pagine), Manuale integrativo (20 pagine), Manuale (3 pagine)
Stampa la pagina
The new version of the system program lets you assign
desired functions to various combinations of the
[SHIFT] key located at the right of the display (the
[CTRL] key), in order to create your own shortcut
keys.
1
In the UNIT section, press the [UTILITY] key
[F5] (CTRL Key Assign) key.
The CTRL Key Asgn. page added in version 2.0
will appear.
2
In the RIGHT SHIFT KEY area, move the
cursor to the CTRL button, and press the
[ENTER] key.
The buttons in the RIGHT SHIFT KEY area are
used to switch the function of the [SHIFT] key
located at the right of the display. When you turn
on the CTRL button, the [SHIFT] key located at
the right of the display will function as a [CTRL]
key to access shortcuts. (Even in this case, the
function of the [SHIFT] key located at the left of
the display will not be affected.)
If you turn the CTRL button on, you will be able
to assign specific functions (e.g., access a page or
turn a certain function on/off) to combinations of
the [CTRL] + [F1] – [CTRL] + [F5] keys.
1
3
2
A
CTRL+F1 –CTRL+F5
B
Function list
C
Assign button
D
RIGHT SHIFT KEY area
Tip!
To return the [SHIFT] key located at the right of the
display to its normal function, move the cursor to the
SHIFT button and press the [ENTER] key.
Shortcut key definitions
4
Version 2.0 Manual Supplement
3
Select the shortcut key combination
(CTRL+F1–CTRL+F5) to which you want to
assign a function, move the cursor to that
combination, and press the [ENTER] key.
The corresponding symbol will be highlighted,
allowing you to assign a function.
Tip!
When the AW4416 is in its initial state, all shortcut
keys are set to No Assign.
4
Move the cursor to the function list, and
use the [DATA/JOG] dial to select the func-
tion that you want to assign.
For a list of the functions that can be selected,
refer to page 25.
Tip!
If you select SCENE RECALL as the assigned function,
a field allowing you to specify the scene number will
appear at the right of the function list. Move the cur-
sor to this area, and use the [DATA/JOG] dial to spec-
ify the scene number.
5
Move the cursor to the ASSIGN button,
and press the [ENTER] key.
A popup window will appear, asking you to con-
firm the assignment.
6
To confirm the assignment, move the cur-
sor to the OK button and press the [ENTER]
key.
7
To execute the assigned function, hold
down the [CTRL] key (the [SHIFT] key at
the right of the display), and press the cor-
responding function key.
[Reference pages]
For details on the CTRL Key Asgn. page
P.25
5