Yamaha Clavinova CLP-280 Manuale di installazione - Pagina 5
Sfoglia online o scarica il pdf Manuale di installazione per Strumento musicale Yamaha Clavinova CLP-280. Yamaha Clavinova CLP-280 24. Yamaha clp-270: supplementary guide
Anche per Yamaha Clavinova CLP-280: Data List (44 pagine)
Stampa la pagina
Troubleshooting
The driver cannot be installed.
• Is the USB cable connected correctly?
Check the USB cable connection.
Disconnect the USB cable, then connect it again.
• Is the USB function enabled on your computer?
When you connect the instrument to the computer for the first
time, if the "Add New Hardware Wizard" does not appear, the
USB function on the computer may be disabled. Perform the
following steps.
1 Select [Control Panel]
Windows 98/Me), or select [Control Panel]*
[Hardware]
[Device Manager] (for Windows 2000/XP).
* Classic View only in Windows XP.
2 Make sure that no "!" or "x" marks appear at "Universal serial
bus controller" or "USB Root Hub." If you see an "!" or "x" mark,
the USB controller is disabled.
• Is any unknown device registered?
If driver installation fails, the instrument will be marked as an
"Unknown device," and you will not be able to install the driver.
Delete the "Unknown device" by following the steps below.
1 Select [Control Panel]
[System]
Windows 98/Me), or select [Control Panel]*
[Hardware]
[Device Manager] (for Windows 2000/XP).
* Classic View only in Windows XP.
2 Look for "Other devices" in the menu "View devices by type."
3 If you find "Other devices," double-click it to extend the tree to
look for "Unknown device." If one appears, select it and click the
[Remove] button.
4 Remove the USB cable from the instrument, and make the
connection again.
5 Install the driver again (page 4).
When controlling the instrument from your computer via USB,
the instrument does not operate correctly or no sound is
heard.
• Did you install the driver?
• Is the USB cable connected correctly?
• Are the volume settings of the instrument, playback device, and
application program set to the appropriate levels?
• Have you selected an appropriate port in the sequence software?
Playback response is delayed.
• Does your computer satisfy the system requirements?
• Is any other application or device driver running?
[System]
[Device Manager] (for
[System]
[Device Manager] (for
[System]
Cannot suspend or resume the computer correctly.
• Do not suspend the computer while the MIDI application is
running.
• If you are using Windows 2000/XP, you may not be able to
suspend/resume normally, depending on the particular
environment (USB Host Controller, etc.). Even so, simply
disconnecting and connecting the USB cable will allow you to use
the instrument functions again.
How can I delete or re-install the driver?
Windows Me/98
1 When the instrument is recognized correctly, double-click
"System" in the Control Panel to open the System window.
2 Double-click the "Device Manager" tab, then select "YAMAHA
USB MIDI Driver" and delete it.
3 Use the MS-DOS prompt or Explorer to delete the following three
files.
n To delete these files using Explorer, select "Folder Options" from
the Tool (View) menu, and select "Show all files (and folders)."
• \WINDOWS\INF\OTHER\YAMAHA***.INF
• \WINDOWS\SYSTEM\Xgusb.drv
• \WINDOWS\SYSTEM\Ymidusb.sys
4 Disconnect the USB cable.
5 Restart the computer.
6 Re-install the driver.
Accessory CD-ROM for Windows Installation Guide
5