Yamaha Clavinova CVP-401 Procedura di installazione - Pagina 2

Sfoglia online o scarica il pdf Procedura di installazione per Strumento musicale Yamaha Clavinova CVP-401. Yamaha Clavinova CVP-401 2.

Deleting the upgrade data

Press the

[BREAK] button

Press

[START/STOP] button

the upgrade data from the USB device.

Confirming the version number

Turn on the power of the instrument normally and wait until the main display appears.

Press the [FUNCTION] button, then select [UTILITY] –>

[OWNER] tab.

Press the [7 ▲ ▼] / [8 ▲ ▼] (VERSION) buttons in the

display.

Check that the version number is correct for the

upgrade, and turn off the power of the instrument.

Troubleshooting

The power supply was cut off or the USB device was removed during installation.

A complete reinstall is necessary. Perform the installation operation again from the beginning.

The installation cannot be executed and an error message appears in the display.

Check the following:

✓

Is the USB device inserted correctly?

✓

Is the USB connector free from dust and dirt?

✓

Is the USB memory or the firmware data itself damaged in some way?

Try installing it again by using another USB device.

to call up the following display.

to start deleting

When the deletion of the upgrade data is

completed, the following display appears.

The upgrade data has been deleted from the

USB device. Turn off the power switch of the

instrument and remove USB device.