Yamaha Cornets Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Strumento musicale Yamaha Cornets. Yamaha Cornets 16. Owner's manual

■ Applying Oil To The Valve

Slides

Depress the piston that corresponds to the

slide that you want to apply oil and partially

remove the slide. Apply a few drops of tun-

ing slide oil.

* Do not apply too much oil.

Hold the piston down and move the slide

in and out a few times.

3rd valve

* If you remove or replace the valve slide

without holding the piston down, the drop

or buildup of air pressure in the pipe can

cause poor piston function or damage to

the inside of the pipe.

* The pistons must be oiled for them to

function properly and smoothly.

After applying slide oil to valve slides

equipped with a spring type slide trigger,

hold the piston down and move the slide in

and out a few times as you did before to

distribute the oil evenly. Also, apply a small

amount of oil to the trigger's shaft and screw.

Tuning slide oil

3rd valve slide

Before You Play

■ CAUTION—Preventing The

3rd Valve Slide From Falling

Off.

On instruments fitted with a stopper screw,

make sure the screw is tight.

Stopper screw

■ Setting The Mouthpiece

Insert the mouthpiece into the mouthpiece

receiver so that the mouthpiece is not loose

in the receiver.

Mouthpiece

* Never force the mouthpiece into the

mouthpiece receiver. The mouthpiece may

become jammed making removal difficult.