Yamaha PORTATONE PSR-500M Manuale d'uso - Pagina 36

Sfoglia online o scarica il pdf Manuale d'uso per Strumento musicale Yamaha PORTATONE PSR-500M. Yamaha PORTATONE PSR-500M 46.

Stampa la pagina

FEATURE REFERENCE (mipi

@ Transmitted Data

The following data is transmitted via the MIDI OUT

connector when either the Remote Control or Multi Voice

mode is selected:

* The transmit channel for each voice is set using the

MIDI CHANNEL button described on page 24.

* All notes played on the keyboard, including velocity data.

In the SPLIT mode the left- and right-hand voices are

transmitted on their respective transmit channels.

* In the FINGERED or SINGLE FINGER mode, only data

corresponding to notes played on the right-hand section

of the keyboard is transmitted.

* Transmitted note numbers are affected by the Trans-

pose setting.

* Transmitted note numbers are affected by the octave

setting.

* Program change and control change data will not be

transmitted if the DUAL function is engaged. Turn DUAL

off if you want this data to be transmitted.

+ Pitch bend data. The actual pitch bend data range is

determined by the pitch bend range setting. If the pitch

bend range is set to 12, for example, data from 00H 00H

to 7FH 7FH will be transmitted. If the pitch bend range is

set to 1, data from 3CH 3AH to 20H 45H will be transmit-

ted.

* The MIDI program change number corresponding to the

number of the selected voice is transmitted when a voice

is selected.

* MIDI control change messages corresponding to reverb,

pan, volume, and sustain are transmitted when these

functions are operated. For details refer to * below.

* AMIDI START message is transmitted whenever the

rhythm or accompaniment is started, and a MIDI STOP

message is transmitted whenever the rhythm or accom-

paniment is stopped. The same applies to demo and

song memory start/stop operations.

* Style, custom style, demo, multi pad, notes added by the

auto harmony function, and song memory playback are

not transmitted.

+ When a VOICE MEMORY button is pressed, the program

change and control change data corresponding to that

voice is transmitted. The previous panel data is

transmitted when a VOICE MEMORY is turned off.

* Control Change Data Value Specifica-

tions (receive and transmit, both modes)

Data Format : BnH -> cc -> vv

BnH: Control Event (n=channel number)

cc : Control Number

vv : Control Value

сс=01Н ; vibrato

OOH - OFH: 0 (off)

10H - 1FH : 1 (min)

20H - 2FH:

30H - 3FH:

40H - 4FH:

50H - БЕН:

60H - 6FH:

70H - 7FH : 7 (max)

Each voice has its own default value that is used when the

voice is initially selected.

Onn

сс-07Н ; volume

7FH :24 (Panel Value ; max)

O1H : 01 (-24dB)

00 H : 00 (no sound)

The default value when no data is being transmitted is 6F

(panel value: 21).

cc=0AH ; pan

ООН - 07H: -7 (Left Most)

08H - OFH :-6

10H - 17H :-5

18H - 1FH : -4

20H - 27H :-3

28H - 2FH: -2

30H - 37H : -1

38H - 47H : 0 (Center)

48H - 4FH:

50H - 57H :

58H - 5FH:

60H - 67H :

68H - 6FH:

70H - 77H :

78H - 7FH : 7 (Right Most)

The default value is "center" when no data is being trans-

mitted.

cc=40H : sustain

vv»

ООН - ЗЕН: ой

40H - 7FH : on

Default is off.

OAnakan=

cc=5BH : reverb

vv»

OOH - 07H : 0 (Off)

08H - OFH:1

10H - 17H:2

18H - 1FH:3

20H - 27H :4

28H - 2FH:5

30H - 37H : 6 (Default)

38H - SFH:7

40H - 47H :8

48H - 4FH:9

50H - 57H : 10

58H - 5FH: 11

60H - 67H: 12

68H - 6FH: 13

70H - 77H

: 14

78H - 7FH : 15 (max)

cc=7BH : all notes off

уу=

ООН (fixed)