Yamaha S03 voice editor Data List - Pagina 23

Sfoglia online o scarica il pdf Data List per Strumento musicale Yamaha S03 voice editor. Yamaha S03 voice editor 29. Voice editor
Anche per Yamaha S03 voice editor: Data List (28 pagine), Manuale di installazione del software (20 pagine), Manuale d'uso (26 pagine)

Stampa la pagina

2.2 Bulk dump

This device uses the following bulk dump messages.

[XG BULK DUMP]

1) XG System bulk dump

2) System Information bulk dump

3) Multi Effect1 bulk dump

4) Multi Part bulk dump

5) Drums Setup bulk dump

[NATIVE BULK DUMP]

1) Native System bulk dump

2) Bulk Control bulk dump

3) Native Multi bulk dump

4) Normal Voice bulk dump

5) Drum Voice bulk dump

2.2.1 XG bulk dump

This message sets XG-related parameters. Unlike parameter change messages, a single

message can modify multiple parameters. The message format is as follows.

11110000

F0H

01000011

43H

0000nnnn

0NH

01001100

4CH

0sssssss

SSH

0ttttttt

TTH

0ggggggg

GGH

0mmmmmmm

MMH

0lllllll

LLH

0vvvvvvv

VVH

0kkkkkkk

KKH

11110111

F7H

Address and Byte Count are given in tables 1-n. Byte Count is indicated by the total size of

the Data in tables 1-n.

Bulk dump and dump request messages are received when the beginning of the block is

specified as the 'Address'.

'Block' indicates the unit of the data string that is indicated in tables 1-n as 'Total size'.

Check sum is the value that produces a lower 7 bits of 0 when the Start Address, Byte

Count, Data, and the Check-sum itself are added.

2.2.1.1 XG System bulk dump

This message sets the XG SYSTEM block (refer to tables <1-1>, <1-2>).

2.2.1.2 System Information bulk dump

This message indicates the contents of the SYSTEM INFORMATION block (refer to tables

<1-1>, <1-3>).

This message is transmitted in response to a Dump Request, but this message will be

ignored if it is received.

2.2.1.3 Multi Effect1 bulk dump

This message sets the MULTI EFFECT1 block (refer to tables <1-1>, <1-4>).

2.2.1.4 Multi Part bulk dump

This message sets the MULTI PART block (refer to tables <1-1>, <1-5>).

2.2.1.5 Drums Setup bulk dump

This message sets the DRUMS SETUP block (refer to tables <1-1>, <1-6>).

2.2.2 S03 native bulk dump

This message modifies parameters unique to the S03.Unlike parameter change

messages, a single message will modify multiple parameters.

The message format is as follows.

11110000

F0H

01000011

43H

0000nnnn

0NH

01101100

6CH

0sssssss

SSH

0ttttttt

TTH

0ggggggg

GGH

0mmmmmmm

MMH

0lllllll

LLH

0vvvvvvv

VVH

0kkkkkkk

KKH

11110111

F7H

Address and Byte Count are given in tables x-n. Byte Count is indicated by the total size of

the Data in tables x-n.

Bulk dump and dump request messages are received when the beginning of the block is

specified as the 'Address'.

Block indicates the unit of the data string that is indicated in tables x-n as 'Total size'.

Check sum is the value that produces a lower 7 bits of 0 when the Start Address, Byte

Count, Data, and the Check-sum itself are added.

2.2.2.1 Native System bulk dump

This message sets the NATIVE SYSTEM block (refer to tables <2-1>, <2-2>, <2-3>).

2.2.2.2 Bulk Control bulk dump

Bulk Control bulk dump This message sets the parameters such as Multi Number, Memory

Bank and Voice Number when the Native Multi bulk dump, Normal Voice bulk dump or

Drum Voice Bulk dump is received (refer to tables <2-1>, <2-2>, <2-4>).

2.2.2.3 Native Multi bulk dump

This message sets the NATIVE MULTI block (refer to tables <2-1>, <2-2>, <2-6>, <2-7>,

<2-8>).

To receive this message, the Bulk Header and Bulk Footer of Bulk Control must be

received before and after reception, respectively.

The Bulk Header determines the Multi number to which the data is stored.

Exclusive status

YAMAHA ID

N:Device Number

Model ID

ByteCountMSB

ByteCountLSB

Address High

Address Mid

Address Low

Data

Check-sum

End of Exclusive

Exclusive status

YAMAHA ID

N:Device Number

Model ID

ByteCountMSB

ByteCountLSB

Address High

Address Mid

Address Low

Data

Check-sum

End of Exclusive

2.2.2.4 Normal Voice bulk dump

This message sets the NORMAL VOICE block (refer to tables <2-1>, <2-2>, <2-9>, <2-

10>).

To receive this message, the Bulk Header and Bulk Footer of Bulk Control must be

received before and after reception, respectively.

The Bulk Header determines the Memory Bank/Voice number to which the data is stored.

2.2.2.5 Drum Voice bulk dump

This message sets the NORMAL VOICE block (refer to tables <2-1>, <2-2>, <2-11>, <2-

12>).

To receive this message, the Bulk Header and Bulk Footer of Bulk Control must be

received before and after reception, respectively.

The Bulk Header determines the Memory Bank/Voice number to which the data is stored.

2.3 Parameter request

This message requests transmission of a parameter value.

The output is transmitted in the Parameter Change message format (refer to 2.1.x).

2.3.1 XG parameter request

This message requests transmission of XG parameter settings.

Settings are transmitted in the format of an XG parameter change (refer to 2.1.3).

11110000

F0H

01000011

43H

0001nnnn

3NH

01001100

4CH

0ggggggg

GGH

0mmmmmmm

MMH

0lllllll

LLH

11110111

F7H

2.3.2 S03 native parameter request

This message requests transmission of a parameter value unique to the S03.

The output is transmitted in the format of a S03 native parameter change (refer to 2.1.4).

11110000

F0H

01000011

43H

0001nnnn

3NH

01101100

6CH

0ggggggg

GGH

0mmmmmmm

MMH

0lllllll

LLH

11110111

F7H

2.4 Dump request

This message requests transmission of a specific block of parameter values.

The output is the same as the bulk dump format.

2.4.1 XG dump request

This message requests transmission of all parameters of the specified block of XG

parameters.

The output is the same as the format of XG bulk dump (refer to 2.2.1).

11110000

F0H

01000011

43H

0001nnnn

2NH

01001100

4CH

0ggggggg

GGH

0mmmmmmm

MMH

0lllllll

LLH

11110111

F7H

Address is valid only when the beginning of the block has been specified.

2.4.2 S03 native dump request

This message requests transmission of all parameters of the specified block of S03 native

parameters.

The output is in the same format as an S03 native bulk dump (refer to 2.2.2).

11110000

F0H

01000011

43H

0001nnnn

2NH

01101100

6CH

0ggggggg

GGH

0mmmmmmm

MMH

0lllllll

LLH

11110111

F7H

Address is valid only when the beginning of the block has been specified.

No System Exclusive Message is received when the Compare function is active.

Realtime messages

3.1 Active sensing

a) Transmission

Transmitted at every 270 msec.

b) Receive

Once FE has been received, failure to receive any MIDI message for an interval longer

than approximately 300 msec will cause processing to be performed as if ALL SOUND

OFF, ALL NOTE OFF, and RESET ALL CONTROLLERS messages were received, and

the unit will reset to a condition in which FE was never received.

Exclusive status

YAMAHA ID

N:device Number

Model ID

Address High

Address Mid

Address Low

End of Exclusive

Exclusive status

YAMAHA ID

N:device Number

Model ID

Address High

Address Mid

Address Low

End of Exclusive

Exclusive status

YAMAHA ID

N:device Number

Model ID

Address High

Address Mid

Address Low

End of Exclusive

Exclusive status

YAMAHA ID

N:device Number

Model ID

Address High

Address Mid

Address Low

End of Exclusive