Yamaha S90 ES Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Strumento musicale Yamaha S90 ES. Yamaha S90 ES 4. Half damper function and damper resonance effect
Anche per Yamaha S90 ES: Manuale breve (11 pagine)

Stampa la pagina

The "SusPedal" parameter selects the Foot Controller type connected to the FOOTSWITCH SUSTAIN jack.

Within in the VOICE data you can customize the Half-Damper response. From VOICE mode select the

Voice you wish to program

•

Press [EDIT]

•

Press Track [1] to select Element parameters

•

Press [F4] AMP

•

Press [SF3] AEG

•

Set Half Damper switch ON (red circle below)

From this display you can make all the time and level settings for the Amplitude EG, which determine

how the volume of the sound changes over time. These can be used to control the change in volume from

the moment a note is pressed on the keyboard to the moment the sound stops. The full names of the

available parameters are shown in the chart below, as they appear in the display.

Settings: SUS TIME: 0 ~ 127

LVL/SW (Level/Half Damper Switch): ON/OFF

Unlike a conventional damper pedal control which simply turns sustain on and off, the Half Damper

function lets you finely control the amount of sustain and natural decay—just as with a real acoustic

piano—by using a continuous pedal controller. If, however, you are controlling the Half Damper function

by Control Change messages from an external MIDI device, it is not necessary to change the "SusPedal"

parameter.

Important notes:

_Keep in mind that two separate parameters must be set to ON in order to use the Half Damper function,

as outlined above.

_The ON/OFF setting of the half-damper feature automatically affects the AEG (Amplitude Envelope

Generator) settings.

_The default setting for the "SusPedal" parameter is "FC (Half On)." When using the FC4 or FC5, make

sure to change this setting, depending on the particular footswitch you are using.

_You can also control the half damper function by using Control Change messages from an external

device. In this case, you do not need to set the Sustain Pedal Select parameter.

Using the FC3

When using the half damper function, set this parameter to "FC3 (Half On)" and turn the half damper

switch on (Voice Element Edit mode

the half damper function, this parameter can be set to "FC3 (Half Off)." Preset Piano Voices are setup to

utilize the Half Damper function and are a great way to learn about its programming.

[F4] AMP

[SF3] AEG display). If you are not going to be using