Yamaha TP3332 Manuale d'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale d'uso per Strumento musicale Yamaha TP3332. Yamaha TP3332 12. Tp3300 series pedal timpani
Stampa la pagina5
Unfold the pedal unit u until the unit stops, then
turn both lock bolts t in the opposite direction
4
described in step
until tight.
u
6
Hold the instrument firmly and return it to an up-
right position.
When putting the instrument away, reverse the order
of the previous procedure.
Caution
Make sure your fingers do not get pinched
between the pedal and kettle when folding the
pedal or pedal base.
Serious injury can result if fingers or feet be-
come pinched.
n Adjusting Pedal Height
After laying the instrument on its side, loosen the
stopper and use the height adjustment screw to ad-
just pedal height. After determining the height, tighten
the stopper to secure.
t
t
Stopper
Height Adjustment
Screw
Transporting and Setting Up the Timpani
n Transporting
When moving the timpani over a distance, such as
from room to room, make sure that the instrument is
carried by at least two persons.
The casters on the sliding legs are convenient when
moving the timpani short distances over smooth sur-
faces such as when changing stage setups, etc. To
move the timpani, unlock the casters, then slightly lift
the timpani by the lugs so that the pedal frame is off
of the ground and slowly move the timpani forward or
backward as shown in the illustration below.
Be careful not to damage the legs
while moving the timpani.
* Damage may occur if the
timpani is dropped or falls
from a high place.
l Attaching the Key/Wrench Holder
Insert the key/wrench holder into the mounting
bracket on the side of the timpani opposite of the
tuning indicator. Once installed it can be used to
hold the tuning key and allen wrench.
* Peel off the protective paper on the adhe-
sive tape on the backside of the holder,
and firmly attach the holder to the mount-
ing bracket.
Tuning Key
Mounting Bracket
Key/Wrench Holder
Allen Wrench
5