Yamaha YGS-100 Manuale d'uso - Pagina 3
Sfoglia online o scarica il pdf Manuale d'uso per Strumento musicale Yamaha YGS-100. Yamaha YGS-100 7. Glockenspiel stand
Stampa la pagina
Before using your Glockenspiel Stand, care-
fully read and follow the precautions below.
■ Tighten All Bolts Firmly. (YGS100)
Make sure that the YGS100A's slide leg fixing bolts
or lower crossbar fixing bolts are firmly tightened
once the stand is set at the desired height. Bolts left
loose may cause the stand's height to shift during
performance and can also cause noise and other
problems. Re-tighten the bolts from time to time.
■ Make Sure the Gears Are Locked
Securely
When adjusting the height of the YGS70,
make sure that the gear's teeth are aligned
then close the lever to securely lock the
gears in place. Using the stand when the
gears are loose and not locked securely may
cause the instrument and stand to drop and
serious injury.
■ Location
Use or storage in the following locations may cause
damage, even when packaged.
• In direct sunlight, such as near a window, or in a
closed vehicle in daytime. Near heating devices or
in other locations subject to excessive heat.
• In excessively cold environments.
• In places with excessive humidity or dust.
• Locations subject to vibrations.
• Locations where the instrument can be exposed to
rain or moisture.
■ Handling
Never lean or step on the stand and/or instrument.
Doing so may result in overturning of the stand and
instrument causing serious injury.
■ Moving and Transporting the Stand
• Before moving the stand, release the caster brakes
and move the stand gently. Also, carry the stand over
rough surfaces. (YGS100)
• Use care whenever moving the stand. Never drop or
throw the stand for any reason.
■ Caster Brakes (YGS100)
Once the playing position of the stand has been
determined, engage the caster brakes. Also, when the
stand is not in use, engage the caster brakes.
■ Keep This Manual for Future Reference
After reading, make sure to keep this manual in a safe
place.
3