Yamaha Clavinova CLP-110 Manuale d'uso - Pagina 34

Sfoglia online o scarica il pdf Manuale d'uso per Tastiera elettronica Yamaha Clavinova CLP-110. Yamaha Clavinova CLP-110 46. Yamaha digital piano owner's manual
Anche per Yamaha Clavinova CLP-110: Manuale di funzionamento rapido (2 pagine), (Francese) Mode D'emploi (46 pagine), (tedesco) Istruzioni per l'uso (46 pagine)

Stampa la pagina

MIDI Data Format / MIDI-Datenformat /

Format des données MIDI / Formato de datos MIDI

If you're already very familiar with MIDI, or are using a

computer to control your music hardware with computer-

gener-ated MIDI messages, the data provided in this section

can help you to control the CLP-110.

Falls Sie bereits mit MIDI vertraut sind oder einen

Computer zur Erzeugung von MIDI-Steuermeldungen für die

Instrumente verwenden, können Sie sich zur Steuerung des

CLP-110 nach den im folgenden Abschnitt aufgeführten

Speziﬁkationen richten.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)

kk =

Note number (Transmit: 09H ~ 78H = A-2 ~ C8 /

Receive: 00H ~ 7FH = C-2 ~ G8)*

vv =

Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv] (reception only)

8nH = Note OFF event (n = channel number)

kk =

Note number: 00H ~ 7FH = C-2 ~ G8

vv =

Velocity

* If received value exceeds the supported range for the

selected voice, the note is adjusted by the necessary num-

ber of octaves.

2. CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number)

cc =

Control number

vv =

Data Range

(1) Bank Select

ccH

Parameter

00H

Bank Select MSB

20H

Bank Select LSB

Bank selection processing does not occur until receipt of

next Program Change message.

(2) Main Volume (reception only)

ccH

Parameter

07H

Volume MSB

(3) Expression (reception only)

ccH

Parameter

0BH

Expression MSB

(4) Damper

ccH

Parameter

40H

Damper MSB

(5) Sostenuto (reception only)

ccH

Parameter

42H

Sostenuto

(6) Soft Pedal (reception only)

ccH

Parameter

43H

Soft Pedal

(7) Effect1 Depth (Reverb Send Level)

ccH

Parameter

5BH

Effect1 Depth

Adjusts the reverb send level.

(8) Effect4 Depth (Variation Effect Send Level) (reception

only)

ccH

Parameter

5EH

Effect4 Depth

Appendix

CLP-110

Data Range (vvH)

00H:Normal

00H...7FH

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H-3FH:off, 40H-7FH:on

Data Range (vvH)

00H-3FH:off, 40H-7FH:on

Data Range (vvH)

00H...7FH

Data Range (vvH)

00H...7FH

Si vous êtes très familier avec l'interface MIDI ou si vous

utilisez un ordinateur pour commander votre matériel de

musique au moyen de messages MIDI générés par

ordinateur, les données suivantes vous seront utiles et vous

aideront à commander le CLP-110.

SI usted está ya familiarizado con MIDI, o si emplea una

computadora para controlar sus aparatos musicales con

mensajes MIDI generados por computadora, los datos

proporcionados en esta sección le ayudarán a controlar la

CLP-110.

3. MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)

cc =

Control number

vv =

Data Range

(1) All Sound Off

ccH

Parameter

78H

All Sound Off

Switches off all sound from the channel. Does not reset Note

On and Hold On conditions established by Channel Messages.

(2) Reset All Controllers

ccH

Parameter

79H

Reset All Controllers

Resets controllers as follows.

Controller

Expression

Damper Pedal

Sostenuto

Soft Pedal

(3) Local Control (reception only)

ccH

Parameter

7AH

Local Control

(4) All Notes Off

ccH

Parameter

7BH

All Notes Off

Switches OFF all the notes that are currently ON on the spec-

iﬁed channel. Any notes being held by the damper or soste-

nuto pedal will continue to sound until the pedal is released.

(5) Omni Off (reception only)

ccH

Parameter

7CH

Omni Off

Same processing as for All Notes Off.

(6) Omni On (reception only)

ccH

Parameter

7DH

Omni On

Same processing as for All Notes Off.

(7) Mono (reception only)

ccH

Parameter

7EH

Mono

Same processing as for All Sound Off.

(8) Poly (reception only)

ccH

Parameter

7FH

Poly

Same processing as for All Sound Off.

• When control change reception is turned OFF, control change

data will not be transmitted or received except for Bank Select

and Mode messages.

• Local on/off, OMNI on/off are not transmitted. (The appropriate

note off number is supplied with "All Note Off" transmission).

• When a voice bank MSB/LSB is received, the number is

stored in the internal buffer regardless of the received order,

then the stored value is used to select the appropriate voice

when a program change message is received.

• The Multi-timbre and Poly modes are always active. No

change occurs when OMNI ON, OMNI OFF, MONO, or POLY

mode messages are received.

Data Range (vvH)

00H

Data Range (vvH)

00H

Value

127 (max)

0 (off)

Data Range (vvH)

00H (off), 7FH (on)

Data Range (vvH)

00H

Data Range (vvH)

00H

Data Range (vvH)

00H

Data Range (vvH)

00H

Data Range (vvH)

00H