Yamaha EZ-EG Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Tastiera elettronica Yamaha EZ-EG. Yamaha EZ-EG 2. Song chord chart
Anche per Yamaha EZ-EG: Manuale breve (2 pagine), Manuale supplementare (3 pagine), Manuale di servizio (34 pagine)

Stampa la pagina

Play Along With the Songs

Try playing along with the songs using the EZ-EG's three play modes: STRUM (right hand), CHORD (left hand), and

BOTH (both hands).

: STRUM

PLAY 1

Play using only your right hand. Great for rhythm

Play using only your left hand. Great for chord

practice.

Press the [SONG] button and use the

[+] and [-] buttons to select the song

you want to play.

The song number will appear on the display.

Press the [CHORD] button to begin

playback in the PLAY 2: CHORD

mode.

Press the [STRUM] button to begin

playback in the PLAY 1: STRUM

The song will begin after a one-measure count-

mode.

in. Finger the chords indicated by the glowing fret

buttons. Playback will only proceed when you

press all of the glowing fret buttons. Playing the

. 1 0

EZ-EG strings in this mode has no effect on play-

back.

Press the [CHORD] button again to stop play-

back.

The song will begin after a one-measure count-

in. Strum the EZ-EG strings with your right hand

and the appropriate chords for the song will

sound. In this mode the fret buttons have no

effect on playback, so you can play anywhere

with your left hand without changing the playback

sound.

Press the [STRUM] button again to stop playback.

If you want the frets to glow to indicate the ﬁnger-

ings of the chords being played, press the

[STRUM] button while simultaneously holding the

[SOUND] and [SONG] buttons.

Connecting To MIDI Devices

The EZ-EG features MIDI IN and OUT connectors that can be used to connect to other MIDI devices for expanded

musical capabilities. It is also possible to load additional songs downloaded from the internet (URL provided below)

into the EZ-EG via these connectors.

What is MIDI?

MIDI (Musical Instrument Digital Interface) is an international standard sys-

tem that allows electronic musical instruments and related devices to com-

municate with and control one another. By connecting MIDI-compatible

devices via standard MIDI cables, it becomes possible to transfer a variety

of performance and setup data between devices for enhanced musical

capabilities.

MIDI IN Connector

Receives MIDI data from external MIDI devices.

MIDI OUT Connector

Transmits MIDI data to external MIDI devices.

• MIDI cables are sold separately and are available from most musi-

cal instrument stores that handle electronic music gear.

• Excessively long MIDI cables can cause data errors. Use MIDI

cables that are no longer than 15 meters.

• Make sure the power to external devices is turned off when con-

necting the EZ-EG. Then, when the required connections have

been made, turn on the external device ﬁrst and then the EZ-EG.

MIDI

YAMAHA

[ Easy Guitar ]

Model

EZ-EG

MIDI Implementation Chart

Transmitted

Function...

Basic

Default

1 - 6

Channel

Changed

Default

Mode

Messages

Altered

**************

Note

28 - 88

Number

: True voice **************

Velocity

Note ON

o 9nH,v=1-127

Note OFF

o 9nH,v=0

After

Key's

Touch

Ch's

Pitch Bend

0,32 o

1 x

6,38 x

7 o

Control

10 o

11 x

Change

64 x

71 x

72 x

73 x

74 x

84 o

91,93,94 x

96,97 x

100,101 x

Prog

o 0 - 127

Change

: True #

**************

System Exclusive

: Song Pos.

Common

: Song Sel.

: Tune

System

: Clock

Real Time: Commands

Aux

:All Sound OFF

:Reset All Cntrls x

:Local ON/OFF

:All Notes OFF

Mes- :Active Sense

sages:Reset

Mode 1 : OMNI ON , POLY

Mode 2 : OMNI ON ,MONO

Mode 3 : OMNI OFF, POLY

Mode 4 : OMNI OFF,MONO

• *1 – *3, see notes bellow.

: CHORD

: BOTH

PLAY 2

PLAY 3

Once you've mastered the left and right-hand

techniques using play modes 1 and 2, try playing

using both hands.

Press the [SONG] button and use the

[+] and [-] buttons to select the song

you want to play.

Press the [BOTH] button to begin

playback in the PLAY 3: BOTH mode.

. 1 0

The song will begin after a one-measure count-

in. Play with both your right and left hands in the

same way you did in the STRUM and CHORD

play modes to play the entire song as smoothly

as possible.

Press the [BOTH] button again to stop playback.

Some Example MIDI Applications

Using the EZ-EG's MIDI capabilities you can, for example, transfer perfor-

mance data between two EZ-EGs, or between an EZ-EG and a MIDI-

equipped personal computer to load songs into the EZ-EG.

Song data cannot be transmitted by the EZ-EG.

G Performance data transferred between two EZ-EGs.

MIDI OUT

MIDI IN

MIDI OUT

EZ-EG

G Song data downloaded from the internet can be loaded into the EZ-EG via com-

puter.

MIDI OUT

MIDI IN

MIDI OUT

EZ-EG

Computer

Date:26-Nov-2002

Version : 1.0

Recognized

Remarks

1 - 16

0 - 127

o 9nH,v=1-127

o 9nH,v=0 or 8nH

Bank Select

Modulation wheel

Data Entry

Part Volume

Pan

Expression

Sustain

Harmonic Content

Release Time

Attack Time

Brightness

Portamento Cntrl

Effect Depth

RPN Inc,Dec

RPN LSB,MSB

o 0 - 127

o(120,126,127)

o(121)

o(122)

o(123-125)

Connecting To a Computer

The EZ-EG can be connected to a computer via MIDI.

G To connect the EZ-EG to a computer that is equipped with USB connectors use a

USB-MIDI interface such as the Yamaha UX16, as shown in the diagram below.

To the EZ-EG

MIDI OUT

MIDI IN connector.

To the EZ-EG

MIDI OUT connector.

MIDI IN

EZ-EG

• If you use the Yamaha UX16, be sure to install the supplied driver on your

computer.

G The EZ-EG can be directly connected to a computer that has built-in MIDI connectors

via standard MIDI cables, as shown in the diagram below.

MIDI IN

. 1 0

MIDI OUT

EZ-EG

G To connect the EZ-EG to a Macintosh computer that has RS-422 ports (the serial

Printer and Modem ports) use a MIDI interface as shown in the diagram below.

MIDI IN

MIDI OUT

EZ-EG

• When using a separate MIDI interface with a Macintosh computer as in

this example, be sure to set the clock speed of the interface from the

computer using the appropriate application software. See your software

manual for details.

Loading Song Data Into the EZ-EG Using the Song Filer Application

In order to perform the operations described in this section you will need to

use a computer connected to the internet to download the free Song Filer

application from the URL listed below.

Song data can be downloaded from the EZ-EG home page for a small fee.

Songs downloaded from the internet can be used in the same way as the

pre-programmed EZ-EG songs.

Data Speciﬁcations For the EZ-EG Play Modes

Number of Songs.................. 99 max.

Data ........................................ 480 kilobytes total.

Data Format........................... XF File Format.

The total number of songs that can be loaded will depend on the data size

of the songs. As an example, about four 100-kilobyte songs can be loaded.

• If SMF (Standard MIDI File) data is loaded it can be played back, but

cannot be used in the PLAY modes.

I Install the Song Filer

Access the following web page using a computer connected to the internet

and, after reading the online instructions, install the Song Filer application.

EZ-EG Home Page Address

http://www.yamahamusicsoft.com/ez-eg/

System requirements for using the Song Filer are as follows:

[Windows]

OS ............................. Windows 95/98/2000/Me/XP

CPU .......................... Pentium/100 MHz or higher

RAM .......................... 8 MB or more

Hard Disk ................. 2 MB or more free

Display ..................... 800 x 600, 256 colors or more

[Macintosh]

OS ............................. Mac OS 7.5 through 9.2.2 (OS X not supported)

CPU .......................... Power PC or greater

RAM .......................... 8 MB or more

Hard Disk ................. 2 MB or more free

Display ..................... 800 x 600, 256 colors or more

Requirements as of November 2002.

*1 EZ-EG functions as a 16-channel multi-timbral tone generator, and incoming data does not affect the

panel voices or panel settings. However, the MIDI messages listed below do affect the panel voices

and songs.

• MIDI Master Tuning

*2 Exclusive

F0H, 7EH, 7FH, 09H, 01H, F7H

• This message automatically restores all default settings for the instrument, with the exception of

MIDI Master Tuning.

F0H, 7FH, 7FH, 04H, 01H, ll, mm, F7H

• This message allows the volume of all channels to be changed simultaneously

(Universal System Exclusive).

• The values of "mm" is used for MIDI Master Tuning. (Values for "ll" are ignored.)

F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mm, ll, cc, F7H

• This message simultaneously changes the tuning value of all channels.

• The values of "mm" and "ll" are used for MIDI Master Tuning.

• The default value of "mm" and "ll" are 08H and 00H, respectively. Any values can be used for "cc."

<EZ-EG Native Parameter Change>

F0H, 43H, 7FH, 00H, 00H, ll, mm, nn, F7H

• The value which ll, mm and nn is Fuction ID, ctr 1 and ctr 2, respectively.

Trans-

Recog-

mitted

nized

Clock

Internal Clock

External Clock

Fret Switch on

Fret Switch off

Fret LED on

Fret LED off

String Data

Switch Data

[+]ON

(Control)

[+]OFF

[-]ON

[-]OFF

Switch Data

[SOUND]ON

(Enter)

[SOUND]OFF

[SONG]ON

[SONG]OFF

Note

str : string number(see below)

vel : velocity of played note(00 is muted)

kno: MIDI note number(see below)

The value which is function ID, ctr 1, ctr 2, str and kno are hexadecimal form.

str (String number) and kno (Note number)

Fret

String (str)

*3 When the song is started, an FAH message is transmitted.

When song is stopped, an FCH message is transmitted. When the clock is set to External, both FAH

(song start) and FCH(song stop) are recognized.

*4 Local ON/OFF

<Local ON> Bn, 7A, 7F

<Local OFF> Bn, 7A, 00

• Value for "n" is ignored

*5 Song data is not transmitted.

o : Yes

x : No

I Using the Song Filer

After installing the Song Filer, connect the EZ-EG to your computer. After

making the required connections and turning the EZ-EG on it will be possi-

ble to transfer song data from the computer to the EZ-EG.

Refer to the EZ-EG home page (URL listed above) for online instructions on

using the Song Filer.

USB-MIDI

G Loading Data Into the EZ-EG

Interface

The song ﬁle data must be transmitted to the EZ-EG from the com-

USB

puter. Loaded song data will be stored in memory numbers "F-1, F-2,

UX16

etc." following the pre-programmed song data (1

Computer

To the EZ-EG

MIDI IN connector.

To the EZ-EG

MIDI OUT connector.

EZ-EG

G Deleting Loaded Songs From the EZ-EG

MIDI OUT

Songs can be deleted from the EZ-EG memory from the Song Filer

application on the computer.

MIDI IN

Computer

• Song data cannot be transferred from the EZ-EG to a computer. Be sure

to save all song data you want to keep on your computer.

Turning Local Control On or Off

MIDI Interface

Local Control determines whether the EZ-EG plays its own internal tone

MIDI OUT

generator (Local Control = ON), or whether performance data is transmitted

Modem Port

via the MIDI OUT connector only, without playing the internal tone generator

(Local Control = OFF).

MIDI IN

Macintosh

Local Control ON

This is the normal setting. In this state the EZ-EG's internal tone genera-

tor will play whatever is played on the strings and frets, as well as any

MIDI data received via the MIDI IN connector.

Local Control OFF

In this state the internal tone generator will not sound in response to

playing the strings and frets, but the performance data will be transmitted

via the MIDI OUT connector. The internal tone generator will play any

MIDI data received via the MIDI IN connector.

Simultaneously press the [CAPO] and [TUNING] buttons.

• Local control is always ON when the EZ-EG power is initially turned on.

Set local control as required.

Use the [+] and [-] buttons to turn local control on or off as required. [+]

turns local control on, while [-] turns it off.

Normally EZ-EG song playback is synchronized to its own internal clock.

Use this function when you want to synchronize EZ-EG playback to a MIDI

clock signal from an external device.

Internal Clock (Int)

This is the normal setting: EZ-EG song playback is synchronized to its

own internal clock.

External Clock (Etr)

The EZ-EG will be synchronized to a MIDI clock signal from a connected

external device. Song and demo playback will not start if an appropriate

external clock signal is not being received.

Simultaneously press the [TEMPO] and [BALANCE] but-

tons.

• The clock is always set to "Int" when the EZ-EG power is initially turned

on.

Set the clock as required.

Use the [+] and [-] buttons to set the clock mode as required. [+] selects

"Int", while [-] selects "Etr".

Problem: No sound.

Check:

Are the batteries properly installed? Are they run down?

Is the VOLUME control turned down?

Is a plug plugged into the PHONES/OUTPUT jack? Speaker output

is automatically cut off when a plug is inserted into the PHONES/

OUTPUT jack.

Is Local Control turned OFF? The EZ-EG will not produce any sound

unless Local Control is turned ON.

Problem: The displays ﬂicker on and off and don't function normally.

Check:

Are the batteries run down?

Problem: Song playback will not start.

Check:

Is the MIDI clock set to "Etr". Try setting it to "Int".

Problem: The EZ-EG is picking up noise.

Check:

Are you using the EZ-EG near a mobile phone? Try turning the mo-

bile phone off or moving it further away from the EZ-EG.

Strings

Frets

Function

ctr 1

ctr 2

Displays

Voices

Play Modes

str

kno

Controls

str

kno

str

kno

str

kno

str

vel

Songs

Tremolo Arm Range

Tempo Range

Balance Range

Capo Range

Tuning

Connectors

Maximum Output Power

PHONES/OUTPUT

Speaker

Power Supply

Power Consumption

Dimensions (w x d x h)

Weight

Supplied Accessories

* Speciﬁcations and descriptions in this owner's manual are for information purposes

only. Yamaha Corp. reserves the right to change or modify products or speciﬁca-

tions at any time without prior notice. Since speciﬁcations, equipment or options

may not be the same in every locale, please check with your Yamaha dealer.

Trademarks

• Apple and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.

• Windows is the registered trademark of Microsoft

All other trademarks are the property of their respective holders.

18).

–

USB-MIDI

Interface

MIDI OUT

USB

MIDI IN

Computer

Setting the MIDI Clock

Troubleshooting

Speciﬁcations

Numeric LED display, 6 x 12 fret LEDs

9 guitar, 8 bass, 3 others

STRUM (right hand), CHORD (left hand), BOTH (both hands)

[STANDBY/ON] switch, [VOLUME] control, tremolo

arm, [STRUM] button, [CHORD] button, [BOTH]

button, [DEMO] button, [SOUND] button, [SONG]

button,

[TEMPO]

button,

[BALANCE]

button,

[CAPO] button, [TUNING] button, VALUE [+]/[-] but-

tons

18 (additional songs can be loaded into internal

memory from a computer)

-300

+300 cents

–

280

–

127

–

28 tuning settings in addition to normal

DC IN 9V, PHONES/OUTPUT (mini stereo jack),

MIDI IN and MIDI OUT

0.7 W (batteries or AC adaptor)

Output impedance: 50Ω

5 cm

PA-D09 AC Power Adaptor (supplied)

Six 1.5V "AA" size, R6P or equivalent batteries

6.5 W (using the PA-D09 AC Power Adaptor)

809 x 300 x 72 mm (32" x 11-3/4" x 3")

1.6 kg (3 lbs. 8oz.) (w/o batteries)

Tremolo Arm, Strap, C-Clip x 2, Pick, AC Power Adap-

tor, USB-MIDI Interface UX16, Safety Precautions

Document, EZ-EG Song Chord Chart, Warranty Card

Corporation.

M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

WA80680 ???PO???.?-02B0 Printed in Taiwan