Yamaha HTR-5230RDS Manuale d'uso - Pagina 24

Sfoglia online o scarica il pdf Manuale d'uso per Ricevitore Yamaha HTR-5230RDS. Yamaha HTR-5230RDS 50. Natural sound av receiver

Stampa la pagina

DIGITAL SOUND FIELD PROCESSOR (DSP) EFFECT

Selecting a DSP Program

You can enhance your listening experience by selecting a

DSP program. Refer to pages 23 to 25 for details about each

program.

–

Make sure that the effect speakers (center,

rear, and subwoofer) are turned on.

Press PROGRAM h or l (or DSP PRG+ or

PRG– ) repeatedly to select the desired

program.

The name of the selected program appears for a

moment and the selected DSP program indicator lights

up on the display.

Front panel

DSP program indicator

Remote control

If desired, adjust the delay time and the sound output level of each

speaker. (Refer to pages 38 and 39 for details.)

Notes

• You can select a DSP program for each of the input sources. Once

you select a program, it is linked with the input source selected at

that time. So, when you select the input source next time, the

same program is automatically selected.

• When a monaural source is being played with PRO LOGIC/

Normal or PRO LOGIC/ENHANCED, no sound will be heard

from the main speakers and the rear speakers. Sound can only be

heard from the center speaker. However, if "CENTER SP" in the

SET MENU is set to the NONE position, the center channel

sound is output from the main speakers.

• When a source connected to the EXTERNAL DECODER INPUT

terminals of this unit is selected, the digital sound field processor

cannot be used.

Canceling the Sound Effect (turning

off the effect speakers)

Press EFFECT to cancel

the sound effect and

monitor only the main

sound.

Press EFFECT again to turn the

sound effect back on.

Notes

• If the sound effect is canceled when Dolby Digital is decoding,

the sounds of all channels are mixed and output from the main

speakers.

• If you turn off the sound effect when Dolby Digital is decoding, it

may happen that the sound is output faintly or not output

normally, depending on the source. In that case, turn back on the

sound effect.

Front panel

Remote control