Yamaha A-S2100 Manuale d'uso - Pagina 20

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Yamaha A-S2100. Yamaha A-S2100 33. Integrated amplifier
Anche per Yamaha A-S2100: Manuale d'uso (42 pagine)

Stampa la pagina

Connections

■ Connecting to the BAL jacks

Connect your CD player or network player with the XLR

balanced output jacks.

Set the ATTENUATOR selector and PHASE selector

located above the BAL jacks according to the component

to be connected.

ATTENUATOR selector:

Select the allowable input level for the XLR balanced

input jacks. If sound from the connected component is

distorted, set the ATTENUATOR selector to ATT. (-6 dB).

PHASE selector:

Select the assignment of the HOT pin of the XLR

balanced input jacks (pin 2 HOT or pin 3 HOT).

NORMAL (pin 2 HOT)

2: hot

3: cold

INV. (pin 3 HOT)

2: cold

3: hot

Refer to the owner's manual supplied with the connected

component and verify the assignment of the HOT pin of

its XLR balanced output jacks.

Yamaha CD players are set to NORMAL (pin 2 HOT).

XLR connectors:

When connecting, be sure to match the pins and insert the

connector of the "male" XLR balanced cable until you

hear a "click". When disconnecting, pull out the "male"

XLR balanced cable while holding down the lever of the

BAL jack.

"Female" XLR connector

1: ground

Note

To select the component connected to the BAL jacks, set the input

source to BAL.

1: ground

BAL jack

"Male" XLR connector

Lever