Yamaha AG-Stomp Manuale d'uso - Pagina 21

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Yamaha AG-Stomp. Yamaha AG-Stomp 32. Yamaha accoustic guitar/pre-amplifier owner's manual
Anche per Yamaha AG-Stomp: Manuale di servizio (45 pagine), Elenco patch (1 pagine), Manuale (olandese) (32 pagine)

Stampa la pagina

Effect Functions and Parameters

Limiter

G LIMITER

The Limiter prevents the input signal from exceed-

ing a preset level (peak).

• LEVEL Knob

Rotate the knob to the right to increase the

amount of the Limiter's effect.

When set to "0.0", the Limiter will have no effect.

Feedback Reduction

The AG-Stomp provides a total of five Notch Filter

circuits that can be used to control specified frequen-

cies.

Applied to frequencies that are the source of feed-

back, these Notch Filters are used to prevent feed-

back from occurring.

Press a band button (the lamp lights) and set the

parameter to operate the filter function.

A total of five Notch Filters can be applied at the

same time.

• FREQ Knob

Sets the frequency to be cut.

• DEPTH Knob

Sets how much the signal will be reduced.

* Refer to the Filter Graph found on page 16.

Chorus/Delay Effects

The AG-Stomp is equipped with Chorus and Delay

effects.

* Both the Chorus and Delay effects can not be used simul-

taneously. Use only one at a time.

G Chorus

This effect adds depth and width to the original tone

by modulating the pitch.

• SPEED Knob

Sets the speed at which the pitch will modulate.

• DEPTH Knob

Sets the depth at which the pitch will modulate.

• LEVEL Knob

Sets the amount of Chorus effect that is mixed

with the original tone.

G Delay

This digital delay effect repeats the original sound

after a determined pause.

• TIME Knob

Sets the delay time (the time separating the origi-

nal sound and the repeated delay sound).

• FEEDBACK Knob

Sets number of times the delayed sound will re-

peat.

* Too high a setting may result in an uncontrolled oscillation

of sound. Please use caution.

• LEVEL Knob

Sets the amount of Delay effect that is mixed

with the original tone.

Reverb Effect

The AG-Stomp is equipped with three types of digi-

tal reverb, HALL, ROOM and PLATE.

G HALL (Hall Reverb)

This reverb effect simulates the reverb produced in

a concert hall.

• REVERB Knob

Controls the volume of the source signal into the

Reverb circuit.

G ROOM (Room Reverb)

This reverb effect simulates the natural reverb pro-

duced in a room.

• REVERB Knob

Controls the volume of the source signal into the

Reverb circuit.

G PLATE (Plate Reverb)

This reverb effect simulates the reverb produced by

a metal plate.

• REVERB Knob

Controls the volume of the source signal into the

Reverb circuit.

* If the same Reverb Type is switched from a patch using a

REVERB level other than "0" to a patch using a REVERB

level of "0", the remaining reverb will be leftover. Of course,

the sound of the new patch will not be affected by the previ-

ous Reverb.