Yamaha DSP-A990 Manuale operativo - Pagina 14

Sfoglia online o scarica il pdf Manuale operativo per Amplificatore Yamaha DSP-A990. Yamaha DSP-A990 50. Digital sound field processing amplifier

Low Pass Jack

When using a subwoofer, connect its amplifier input to this

jack. Frequencies below 200 Hz from the left main, right main

and center channels are output to this jack.

Center Out Jack

Center-channel line output. Not connected when the built-in

amplifier is used. Can be connected to input jack of an external

power amplifier to drive the center speaker.

Voltage Selector (General Model only)

Be sure to set to the line voltage in your area before applying

power. Consult your dealer if unsure of the correct setting.

Switched AC Outlets

You may plug other audio components into these sockets as

long as their combined power consumption does not exceed

the specified value shown. "Switched" means that these

components are turned on and off by this unit's power switch.

Unswitched AC Outlet (General Model only)

The total power consumption of audio components plugged

into this socket should not exceed the specified value shown.

"Unswitched" means that power is available even when this unit

is off.

NOTE: If an external power amplifier is connected to the front

effect or rear effect output jacks, the corresponding internal

amplifier will be turned off and no output will be available at the

speaker terminals.