Yamaha KAX-3500 Manuale d'uso - Pagina 10

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Yamaha KAX-3500. Yamaha KAX-3500 16. Owner's manual

■ Wiring

(1) Turn off the POWER switch.

(2) Remove the cover attachment screws and remove the pro-

tective cover from the speaker terminals.

(3) Remove about 15 mm of insulation from the end of each

speaker cable, and pass the bare wire through the holes in

the appropriate speaker terminals. Tighten the terminals to

securely clamp the wires. Refer to page 9 for speaker

polarities.

Speaker cable

Be sure that the bare wire ends do not jut out from the ter-

minals and touch the chassis. The following shows how the

cable should look when correctly attached.

(4) Reattach the protective cover over the speaker terminals.

Screw

* Actual size

Bare wire

Chassis

Speakon connector

(1) Turn off the POWER switch.

(2) Insert the Neutrik NL4FC plugs into the Speakon connec-

tor on the rear of the amplifier, and turn clockwise to lock.

Neutrik NL4FC plugs

CHANNEL

STEREO or PARALLEL

1–

2–

Neutrik NL4FC plugs

CHANNEL

1–

Phone jack

(1) Turn off the POWER switch.

(2) Insert the phone plug into the jack on the rear of the ampli-

fier.

BRIDGE

A+

A–

1–

B+

–

B–

2–

B+

B–