Yamaha THR5 Manuale d'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Yamaha THR5. Yamaha THR5 23. Thr series
Anche per Yamaha THR5: Manuale d'uso (21 pagine), Manuale d'uso (22 pagine), Manuale (14 pagine), Manuale d'uso (20 pagine), Manuale d'uso (20 pagine), Manuale di avvio rapido (5 pagine)

Stampa la pagina

Troubleshooting

No power

• Is the power adaptor properly connected?

(g page 15)

• Are the batteries properly installed? (g page

15)

No sound

1) No instrument sound

• Is the guitar properly connected to the INPUT

jack? (g page 14)

• Is the volume control on the instrument

turned up?

• If the GAIN, MASTER, GUITAR OUTPUT

(THR10/10C/10X), VOLUME (THR5/5A)

controls set to 0, the instrument will produce

no sound. (g pages 11, 12)

• If the AMP control is set to CLEAN and all of

the tone controls are set to 0, the instrument

will produce no sound. (g page 9)

• Are the headphones disconnected from the

PHONES jack? (g page 12)

• If the Compressor Output set to 0 with the

THR Editor the instrument will produce no

sound. (g page 18)

• Is the Tuner function switched OFF? (g page 9)

• Is the cable connecting the instrument to the

unit damaged?

2) No audio sound from the computer

• Is the USB cable properly connected to both

devices? (g page 14)

• Is the Yamaha Steinberg USB Driver properly

installed in the computer? (g page 16)

• Is the proper audio output port selected in

the "Connecting a Computer to the Unit"

section? (g page 16)

• Is output from the computer or the applica-

tion muted?

• With the THR10/10C/10X, is the USB/AUX

OUTPUT control turned up? (g page 12)

• Is the USB cable connecting the devices

damaged?

3) No audio sound from the AUX Input

• Is the cable connecting the device to the AUX

Input properly connected? (g page 14)

• Is the volume control on the connected

device turned up?

• With the THR10/10C/10X, is the USB/AUX

OUTPUT control turned up? (g page 12)

• Is the cable connecting the device to the AUX

Input damaged?

(THR5/5A only) Audio volume from the

computer connected to the unit via USB is

too low or too high.

• Launch the THR Editor on the computer and ad-

just the volume output using the "USB Volume"

setting. (g page 18)

Cannot set the Tap Tempo

• Is DLY or DLY/REV selected? The tap tempo

cannot be set with any other effects. (g page 9)

The Power Lamp does not light

• In the THR Editor (g page 18) open the

Preferences and set the Power Lamp to ON.

A "#" appears in the LED display

• A "#" appears in the display when the Extended

Stereo setting is set to OFF. (g page 9)

Noise is heard during audio playback

• Lower the volume on the guitar amp.

Can not edit parameters with the THR Editor

• Is the unit's Tuner Function switched ON?

Switch the Tuner Function OFF. (g page 9)