Yamaha XM4220 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Amplificatore Yamaha XM4220. Yamaha XM4220 13. Yamaha power amplifier owner's manual

Connection

1. If the wire insertion ports are closed, turn the screws

on top of the connector counterclockwise to open the

ports.

2. Insert the wires into the appropriate ports, following

the indication of the pole on the input terminal, turn

the screws on top of the connector clockwise to fix the

wires.

3. Attach the Euroblock connector to the input terminal

on the unit.

Use a screwdriver

to fix the wires.

–

1. Turn off the POWER switch.

2. Remove the cover attachment screws and remove the

protective cover from the speaker terminals.

After removing approx. 15 mm of insulation from the

ends of the speaker cables, pass the bare ends of the

speaker wires through the holes in the corresponding

speaker terminals and tighten the terminals to securely

clamp the wires. Refer to page 6 for speaker porality.

Shown actual size.

At this time make sure that the bare ends of the

speaker cables do not extend from the terminals in

such a way that they touch the chassis.

Wire should not

touch the chassis.

4. Reattach the protective cover over the speaker

terminals.

Screw