Yamaha DHR 15 Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti Yamaha DHR 15. Yamaha DHR 15 24. Powered speaker system

Controls and Connectors

Rear

q Input jacks (CH1 and CH2)

These are balanced combo jacks that support both XLR

and phone plugs (both CH1 and CH2), and RCA pin

plugs (CH2 only). For the combo jacks, connect a mixer,

microphone, or digital musical instrument such as a key-

board. For RCA-pin jacks, connect a device such as an

MP3 player or a CD player. For devices with high level sig-

nals such as a mixer, connect to CH2, or connect to CH1

then set the [MIC/LINE] switch (w) to [LINE].

XLR

NOTE

For CH2, inputs to the combo jack and to the RCA pin jacks will

be mono mixed at a fixed balance. If you want to change the bal-

ance, adjust the volume of the connected sound source.

Phone

RCA-pin

w [MIC/LINE] switch

Set this switch to [MIC] or [LINE] for the CH1 jack,

depending on the level of the input signal. For low-level

signals (such as microphones), set the switch to [MIC].

For high-level signals (such as mixer), set the switch to

[LINE].

e [LEVEL] knobs

Adjust the level of each input jack (q).

r Output switch

Selects the output signal sent to the output jack (t).

[CH1 THRU]: Delivers the direct output signal of CH1 only.

Signal from CH2 will not be output.

[CH1+2 MIX]: Outputs the mixed signals of CH1 and CH2.

t Output jack

This is a balanced XLR jack. This can be used to connect

another DHR speaker. Outputs the signal selected by r

output switch.