Yamaha YSP-CU3300 Manuale di riferimento rapido

Sfoglia online o scarica il pdf Manuale di riferimento rapido per Sistema di altoparlanti Yamaha YSP-CU3300. Yamaha YSP-CU3300 2. Quick reference guide

Stampa la pagina

Yamaha YSP-CU3300 Manuale di riferimento rapido

Quick Reference Guide

This Quick Reference Guide explains steps to connect external components to this unit and start playback. For detailed operation,

refer to the "Owner's Manual" in the supplied CD-ROM.

Check that you received all of the supplied accessories referring to "Supplied accessories" of "Safety and Accessory Information"

(separate booklet). For instructions on how to operate or set the external components, refer to the owner's manual supplied with each

component.

In this guide, the YSP-CU4300 center unit is used for illustrative purposes.

Installation

Connection

Settings

Playback

Installing YSP-4300/YSP-3300

Center unit

Subwoofer

Center unit

Subwoofer

• Install the center unit in the center of the left and right walls.

• To prevent sound reflecting off of walls, angle the subwoofer

• Place the center unit on a TV stand in front of the TV.

slightly toward the center of the room.

Use the TV Remote Repeater function if the center unit

• When installing the subwoofer on a rack, be sure the rack is

obstructs the remote control sensor on the TV (see page 12 of

strong enough to support the subwoofer and that it leaves

the Owner's Manual).

sufficient space for heat discharge.

Increase the height of the center unit if the TV stand is too high

• The center unit and subwoofer communicate wirelessly.

for center unit installation (see page 12 of the Owner's Manual).

Subwoofer performance may be affected if the subwoofer is

• The listening position (such as sofa, etc.) should be located at

placed on a metal rack, or if there is a metal plate between the

the front of the center unit.

subwoofer and the center unit.

• The distance between the listening position and the center unit

• The subwoofer can also be placed on its side (see page 13 of

should be more than 1.8 m (6 ft).

the Owner's Manual).

• This unit can be mounted on a wall using WALL MOUNT

BRACKET SPM-K20 (option). Refer to the SPM-K20 Install

Manual and SPM-K20 Information for YSP-CU4300/

YSP-CU3300.

This unit creates surround effects by reflecting sound beams off

Parallel installation

the walls of your listening room. The arrows in the diagrams on the

40° to 50°

right indicate the images of paths of 5-channel sound beams. To

achieve desired surround sound effects, install this unit where

there are no objects such as furniture obstructing the path of sound

beams.

Objects,

1 Front left channel

4 Surround left channel

such as

2 Center channel

5 Surround right channel

furniture

3 Front right channel

Printed in Malaysia

ZD75600 [En]

Installation

Connection

Settings

UCABGLVFH

Connection

When external devices such as a TV, Blu-ray disc player, and/or game console are connected, audio and video signals are transmitted

as shown below.

Audio

connection

This unit: Plays audio from TV broadcasts, Blu-ray discs, etc.

Video

connection

Audio and video

English

connection

HDMI cable

Game console

(HDMI compatible)

Blu-ray disc player

Satellite and cable TV tuner

(not HDMI compatible)

• Do not connect the power cable until all connections are completed.

• Do not use excessive force when inserting the cable plug. Doing so may damage the cable plug and/or jack.

■

Connecting a TV and a Blu-ray disc player

For the cable connection, follow the procedure below.

HDMI cable (optional)

Input the digital audio/video signals of

The digital video of the Blu-ray disc

the Blu-ray disc player to this unit.

player is reflected on TV.

U.S.A., Canada,

Europe, Russia, and

China models only

1. Remove the cap

Corner installation

HDMI

OUTPUT

Blu-ray disc player

Video signals

OPTICAL

Audio signals

OUTPUT

HDMI INPUT

Objects, such as furniture

Playback

yTips

Audio return channel (ARC) supported TV

• Connect an HDMI cable to the audio return channel supported jack (the jack with "ARC" indicated) on TV. In this case, you do not need

to connect an optical cable.

• Activate the HDMI control function of this unit so as to activate the audio return channel (ARC) (refer to "HDMI setup" in the Owner's

Manual).

What is audio return channel (ARC)?

A function transmits digital audio signal output from TV to this unit through an HDMI cable. By this function, an optical cable to connect TV

and this unit is not needed.

■

Connecting a game console or satellite/cable TV tuner

HDMI cable

External device (example)

Optical cable

Use to connect a TV

HDMI compatible

that does not support

audio return channel

(ARC) to this unit.

Optical cable

not HDMI compatible

Composite video cable

TV: Plays video from TV broadcasts,

Blu-ray disc player, etc.

Optical cable (supplied)

Play back digital sounds of TV on this

unit.

To AC wall outlet

HDMI

OUTPUT

2. Check the direction

of the plug

Video signals

Audio signals

yTip

To connect a device with an AUX output jack, connect its AUX output jack to the AUX INPUT DIGITAL (coaxial) jack on this unit via a

commercial coaxial digital audio cable.

■

Connecting the FM antenna (YSP-4300 only)

Connect the supplied FM antenna via the FM ANTENNA jack.

Connecting cable

■

Connecting the wireless subwoofer

Satellite/cable TV tuner

HDMI cable (optional)

Game console

HDMI cable (optional)

Game console

HDMI cable (optional)

To connect the supplied subwoofer to the center unit wirelessly, the same

group ID must be assigned to the center unit and subwoofer. The default

Optical cable (supplied)

group ID for both components is A1, enabling wireless connection by

Satellite/cable TV tuner

Composite video cable (optional)

simply plugging the subwoofer's power cable into an electrical outlet.

When using the transmitter (YIT-W12TX)*, the same group ID must be

RCA stereo cable (optional)

Game console

assigned to the center unit and subwoofer. The default group ID of

Composite video cable (optional)

YIT-W12TX is A1.

The LINK indicator lights when the subwoofer is on and the subwoofer

and center unit are connected wirelessly.

When the center unit enters standby mode, the subwoofer and LINK

indicator turn off.

To AC wall outlet

* For details of YIT-W12TX, refer to "Safety and Accessory Information"

(separate booklet).

U.S.A., Canada,

Europe, Russia, and

China models only

■

Preparing remote control

Install the batteries

ANALOG

OUTPUT

OPTICAL

OUTPUT

VIDEO

Pull up on the latch to

OUTPUT

release the cover

HDMI

OUTPUT

Insert the

protrusions into

VIDEO

the slots and

INPUT

close the cover

FM antenna

Group ID switches

LINK

LINK indicator

LINK

Blinks: Establishing

connection

Lights: Connection

established

To AC wall outlet

Operation range

Within 6 m (20 ft)

Battery × 2

(AAA, R03, UM-4)