Clark Synthesis TACTILE SOUND AQ339 Aquasonic Manuale di installazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione per Amplificatore Clark Synthesis TACTILE SOUND AQ339 Aquasonic. Clark Synthesis TACTILE SOUND AQ339 Aquasonic 20. Underwater speaker
Anche per Clark Synthesis TACTILE SOUND AQ339 Aquasonic: Manuale supplementare (4 pagine), Specifiche tecniche (1 pagine), Elenco delle parti (1 pagine), Manuale d'uso (1 pagine), Scheda di riferimento (1 pagine), Manuale di installazione (12 pagine), Manuale di installazione (3 pagine), Specifiche (1 pagine)

ISOLATION TRANSFORMER INSTALLATION

Place the Isolation Transformer

in a dry, indoor, location.

The transformer is not

designed to be mounted

outdoors.

Locate the speaker cable

from the amplifier. Remove

.75 in. (20 mm) of the cable's

outer jacket.

Insert the positive wire

(usually white or red) to the

1+ terminal, and the negative

wire (usually black) to the 1-

connection. Tighten the 1+

and 1- screws.

Diluvio

Underwater Speaker

™

Transformer may be mounted

to a wall using mounting

tabs. (The transformer is

heavy and must be securely

mounted to the wall.)

Remove .3 in. (8 mm) of

insulation from each wire.

Push the gray ring down

until it locks on the

connector's body.

Locate the Neutrik Speakon

connector. Remove the

connector from the bag.

Place the Speakon

connector's blue bushing on

the amplifier cable.

Screw the blue bushing onto

the connector's body. The

connector is now assembled.