Caliber HFB 300 Manuale - Pagina 5

Sfoglia online o scarica il pdf Manuale per Automobile Accessories Caliber HFB 300. Caliber HFB 300 9.

Stampa la pagina

HFB300manual_GB

15-05-2008

ENGLISH

2.2 Mounting your Handsfree

It is easily to mount on the dashboard of the car with mounting dock and double-side sticker, or

use Sun-visor Clip to fix the Handsfree device on the sun-visor over driver's seat. It can be more

flexible to use the Handsfree in the car or carry out to the office and home

Fixing the mounting dock

Plug the part 1 to the inlet, then tear the paper off the Double-side Sticker, paste the mounting

dock on the right place on the vehicle. Put the device in the mounting dock. Note that, the char-

ging port that is on the device and the gap that is on the mounting dock must be at the same

direction.

Fixing the vent mount clip

If using the Vent Mount Clip, insert the clip in the vent in the car. Note that, the microphone of the

Handsfree can't aim at the vent to avoid noise in talking mode.

Fixing the sun-visor

Fix the mounting dock and the Sun-visor Clip, and then clip to the sun visor in your vehicle. Note

that, the microphone of the Handsfree must aim at the sound bearing.

15:54

Pagina 9

2.3 Turn On/Off Handsfree

Turn on the Handsfree: Long press K1, you will hear 2 power-up tones, Blue LED gives 3 quick

blinks then Blue LED gives 1 blink per 3 seconds; Red LED is off.This indicates the handsfree is

power on.

Turn off the Handsfree: Long press K1, you will hear 2 power-down tones, Red LED will blink

3 times then all LEDs are off.This indicates the handsfree is power off.

2.4 Pairing/Connecting your Handsfree with Bluetooth Equipment

2.4.1 Pairing your Handsfree with Bluetooth handset

Before making and answering calls, you must pair your handsfree and phone. Paring sets up a uni-

que relationship between your handsfree and your handset.The handset will memorize the hands-

free's unique ID (or passkey).This ensures that a unique and encrypted wireless link between your

handsfree and handset will be used during calls.

Detailed operation procedures are as follows:

1. Place your handsfree close to your Bluetooth handset, and ensure your handsfree is power off,

your handset is power on

2. Press and hold K1 for at least 6 seconds until the Blue and Red LEDs alternate continuously.

You will hear 2 power-up tones and a pairing tone to indicate that the handsfree has

successfully entered the paring mode

3. Following your phone user guide to active Bluetooth device search on the phone side, on your

phone screen you will see a list of Bluetooth equipment found by the phone at the end of the

searching process.

4. Select this Bluetooth Handsfree from the list (for HFB 300 the sign is 'BTHF202)

and initiate pairing following handset's on-screen prompts.

5. Continue to follow on-screen prompts to enter passkey "0000"and confirm to pair the hands

free with your handset. Once the pairing procedure is completed, you will hear a connecting

tone, and then Blue LED gives 3 quick blinks per 2 seconds. It indicates that the handsfree

device and the handset are paired and connected.

Note:

1. If pairing is successful, handsfree's Red LED is off.The Blue LED gives 3 quick blinks per

2 seconds. If paring is failed£¨the Blue and Red LEDs alternate continuously (for about

2 minutes).You need to go back to above steps 3-5 to repeat the paring process.

2. Your handsfree will remain in the pairing mode for about 2 minutes. If paring cannot be

finished within 2 minutes, the handsfree will enter into the standby mode (without Bluetooth

connection in this case).You need to repeat the above steps 2-5 to restart the pairing process.

2.4.2 Pairing your Handsfree with Other Bluetooth Equipment

In addition to Bluetooth phone, your handsfree can also pair with other Bluetooth equipment for

realizing short distance wireless communications.