Clarke 3120110 Istruzioni per il funzionamento e la manutenzione - Pagina 6
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke 3120110. Clarke 3120110 17. Ratchet wrench
Stampa la pagina
Use only clean, dry, regulated compressed air as a power source.
Air compressors used with the tool must comply with the appropriate
European Community Safety Directives.
The air hose must be rated at least 150% of the maximum operating pressure of
the tool.
For optimum performance it is recommended that a 3/8" ID airline hose is
used.
Set the tool in the OFF position before connecting it to the air supply.
A build-up of moisture or oil in the air compressor will accelerate wear and
corrosion in the air tool. Ensure any moisture is drained from the compressor
daily and the inlet filter is kept clean.
If an unusually long air hose is required, (over 8 metres), the line pressure or the
hose inside diameter may need to be increased by up to 15 psi to maintain air
pressure at the tool.
Never exceed the maximum operating pressure for the air tool. It is
recommended that air pressure to this tool does not exceed 90 psi at the air
tool when running. Higher pressures and dirty air will shorten the life of the tool
due to faster wear and is a possible safety hazard.
Check hoses for wear or damage before use.
USEFUL ACCESSORIES
A wide range of accessories are available including filter/regulators,
lubricators, high pressure hoses, etc. Contact your CLARKE dealer for further
information, or call CLARKE International on 01992 565333.
Suitable Ratchet Wrench compatible socket sets include the following are
available in the CLARKE catalogue
1700431 PRO31 10 piece 1/2" drive AF socket set
1700432 PRO32 10 piece 1/2" drive metric socket set
1700437 PRO37 7 piece 1/2" drive deep AF socket set
1700438 PRO38 9 piece 1/2" drive deep metric socket set
1700452 PRO52 6 piece 1/2" drive hex bit socket set
1700429 PRO29 9 piece 3/8" drive AF socket set
1700430 PRO30 9 piece 3/8" drive metric socket set
1700435 PRO35 8 piece 3/8" drive deep AF socket set
1700436 PRO36 8 piece 3/8" drive deep metric socket set
1700451 PRO51 6 piece 3/8" drive hex bit socket set
6
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]