Clarke CDP10B Istruzioni per il funzionamento e la manutenzione - Pagina 6
Sfoglia online o scarica il pdf Istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke CDP10B. Clarke CDP10B 19. 12 speed drill press
Stampa la pagina
ADDITIONAL SAFETY RULES FOR DRILL PRESSES
THIS MACHINE MUST NOT BE MODIFIED, OR USED FOR ANY PURPOSE OTHER
1. IMPORTANT: You should not operate this machine unless you are thoroughly familiar with
drilling machines and drilling techniques. If there is any doubt whatsoever, you should
consult a qualified person.
2. Do not operate the machine until it is completely assembled, and you have read, and
understood this entire manual
3. Ensure the proper electrical regulations are followed, and that the machine is properly
earthed.
4. Before switching the machine ON, ALWAYS:-
a. Ensure all chuck keys, spanners and wrenches are removed from the machine.
b. Examine the setup carefully, ensuring that the workpiece is perfectly secure.
c. Ensure your clothing is properly adjusted.
5. Make all adjustments with the power OFF.
6. Always use the correct drilling speeds for the drill size, and the type of material being drilled
(see page 14).
7. NEVER leave the drill unattended whilst it is running. Turn the machine OFF and do not
leave until it has come to a complete stop.
8. When you have finished with the machine, always remove and store the drill bits.
9. CAUTION: This Drill Press is designed for use with Drill Bits ONLY. The use of other cutting
tools or accessories could be hazardous.
10. ALWAYS use clamps, or a drill vice bolted to the table, to hold the work. It should NEVER
be held in bare hands.
WARNING:
THAN THAT FOR WHICH IT IS DESIGNED.
6