Clarke CMFTLi Manuale di istruzioni per il funzionamento e la manutenzione - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per il funzionamento e la manutenzione per Utensile elettrico Clarke CMFTLi. Clarke CMFTLi 17. Cordless multi function tool
Stampa la paginaUSING THE SANDER ATTACHMENT
WARNING: ALWAYS WEAR EYE PROTECTION AND A DUST MASK FOR
DUSTY APPLICATIONS AND WHEN SANDING OVERHEAD.
CHOOSING THE CORRECT SANDING SHEET
Make sure that you use the correct sandpaper grit for the work at hand.
Always test on a section of unwanted material before use.
The sanding sheets are rated according to the number marked on the back of
each sheet. The lower the number, the coarser and more abrasive the
particles on the sheet will be. (use lower grits for rough wood and higher grits
for finishing)
SANDING
1. Switch the tool on.
2. Place the tool on the workpiece,
ensuring the whole area of the
sanding base/pad is in contact
with the work surface.
3. Allow the tool to do the work and
do not apply heavy pressure.
• Heavy pressure will cause the
sanding sheets to wear out
faster and can damage the
motor.
4. If sanding into corners, use the tip
or corner of the sanding pad.
• When spot sanding like this, the
sanding sheet can heat up,
you must therefore lower the
speed of the tool and let the sanding sheet cool down regularly.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Not the Actual Model Supplied
Not the Actual Model Supplied
11